- Jukebox-list - lists.netlojix.com

Three jukes in auction, Huntsville, AL
by Tony Miklos 01 Aug '23

01 Aug '23

I am in no way affiliated with this, just thought I'd possibly help out the non profit fundraiser. three jukes for online auction. https://app.charityauctionstoday.com/auctions/2023-huntsville-area-crime-st… Tony

1 0

NSM prestige 2 EAROM programing
by Tony Miklos 31 Jul '23

31 Jul '23

NSM Prestige II EAROM ER-1400 I've tried my best to follow the manual but can't manage to program this thing. If possible, all I (might) really need is to set it for 80 records and free play. I go through the process but it doesn't seem to work. I managed to mess up the first one, I think I programmed the "secret" code and locked myself out. Luckily I bought 3 so I'm on number 2. Is there a way to clear them without a programmer or whatever? Do I have to start at the beginning and set a value for each command in order for the free play to work. With the original earom it was scanning but not counting as it scanned. I have two control units and if I put the good earom in, it will work perfectly. (luckily they are in a socket) I do very little work on NSMs, all I've ever had is mech problems but fixed those. Tony

1 0

3rd time's the charm? - Amp rebuild
by David Breneman 26 Jul '23

26 Jul '23

Thanks to everyone who helped me debug my mailproblem and answered my question about amp rebuilds.I'm trying this from my yahoo account. I switched to theTelekom account years ago because yahoo wasn't playingnice with mailing lists. Hopefully that's changed. To sum up - I need to get the amp and selection receiverrebuilt on my Seeburg M100-A. I'm in the Seattle area.Looking for recommendations. Sorry to be repetitive, butI only saw the replies that were CC'ed to me. David Breneman david_breneman(a)yahoo.com

3 4

CD player 1252/00
by Tony Miklos 25 Jul '23

25 Jul '23

This is the first Phillips 1252/00 I've had the pleasure of working on, does the laser for the 1252/10 work in it? It is from an early Wurlitzer OMT CD if you are curious. Thanks, Tony

1 0

Old Question - Amp Rebuild
by David Breneman 25 Jul '23

25 Jul '23

It's an evergreen. The amp (and selection receiver) in my Seeburg M100-A are showing their age and need to be rebuilt, and I don't have the time or workbench space to do it. Recommendations for folks performing this service? Thanks! -- David Breneman dbreneman(a)t-online.de

3 2

Followup to my amp question.
by David Breneman 24 Jul '23

24 Jul '23

I've received no replied to my question about amp rebuilders. I haven't received anything from this mailing list for weeks. If no one has replied, fine. But if you have, can you please CC me directly, and that will be my cue that something is wrong with my subscription. Thanks! -- David Breneman dbreneman(a)t-online.de

4 4

Seeburg KD motor direction
by JIM & LAURIE DIRKSEN 24 Jul '23

24 Jul '23

Seeburg KD has been gone thru, boards rebuilt, mech removed, cleaned, lubed, all switches cleaned and checked with meter. When I make a selection, the motor will not start until I manually turn the coupling a few revolutions. Then it selects and plays just fine. "O" contacts are good and I installed a new motor cap with the same results. But here's the kicker - if I turn the motor in the "wrong" direction, it will start rotating that direction and play normally, even with the reversing switch flipped the other direction. While scanning, I can flip the reversing switch but it will not change direction. It will do this in either direction. Bizarre... The only way it changes direction is when it bangs into the hard stop and the motor temporarily stalls. I will try another motor tonight, just wondering if anyone has seen this before.

3 3

Rockola CD Fireball Mechanism Question
by ron jukebox 22 Jul '23

22 Jul '23

Hello, I know it is rather difficult to find anyone with first hand knowledge of the Rockola Fireball CD model B - X, but, I am hoping. The CD selection mechanism is like the Soundleisure one, where 100 CDs stand side by side about 3mm apart and the lifting arm lifts them vertically adn transports the CD to the middle where the CD Pro player is located. The Cd is played vertically. Is anyone familiar with setting in the menu system that allows a slight adjustment to the location of pickup and placement of the CD's . I know I have seen, that in the menu system somewhere, there was a strange setup number in the menu. The display showed two rows of numbers separated by spaces. I remember that if, when at this location of the menu, if I hit certain numbers, the mechanism would creep left or right ever so slightly, like a micro adjustment. Is that how one would adjust the mechanism? IF, adn I probably did, I moved the mechanism slightly out of adjustment, would a factory reset set it back? An, oh by the way, the issue is that occasionally now, it does not pickup or set back the CD properly. Typing these issues is always difficult for me. (You cannot see my hands moving when I am talking - lol) Thanks in advance to all in this group!Ron

1 0

Seeburg Black Box
by Paul Howlett 21 Jul '23

21 Jul '23

I have a black box with a strange problem. It works fine with any 2xx selection but 100's only up to 136. After that it plays 136 or wrong selections. -- Paul Howlett Pinball Paul's 703-361-0420

1 0

Seeburg PFEA1 Selection issue
by Jukebox Repairman 20 Jul '23

20 Jul '23

I’m currently troubleshooting an issue on this Seeburg Electra. The machine has credit on, latch solenoid engaged. Attempt any selection, buttons latch and stay down, carriage scans but the buttons do not release. Looking in the manual this machine came with an APU3 ( pricing unit) but this one has a UDPU4 installed. I checked, cleaned all leaf switches on the ES but having trouble determining where the fault lies. Is it possible that this universal pricing unit is not compatible with this machine? It doesn’t seem that it would be as the plugs match the sockets correctly Regards Rick

2 4

2026

2025

2024

2023

Jukebox-list