February 2023 - Jukebox-list - lists.netlojix.com

Re: [Jukebox-list] AMI Continental 2 Microtecnica bias spring
by Federico Croci 22 Feb '24

22 Feb '24

Thanks!! > Il 17/01/2023 19:51, Chan Gade ha scritto: > Here it is on an arm in the I-200: > https://www.flickr.com/photos/90641375@N06/37325736231/ The hyperlink > probably won't get through, so copy/paste. > > Attached is a shot of the Continental 1 with counterweight. I did this > in 1986. It was necessary to cut off a small section of the mech dress > cap to clear the added counterweight. > > RobNYC -- Federico Croci wiz(a)tilt.it www.tilt.it

8 10

AMI Amplifier?
by Jamie McElroy 01 Aug '23

01 Aug '23

Hello all, I recently rebuilt my AMI G-80 amplifier. I replaced all the capacitors and Ive noticed that I am getting a little humming from my speaker and a little squelchy noise from time to time when my records play. Does anyone have any thoughts? Thanks as always Jamie

7 10

Test of server migration #2.
by Jay Hennigan 25 Jun '23

25 Jun '23

Testing, please ignore. -- Jay Hennigan - jay(a)west.net Network Engineering - CCIE #7880 503 897-8550 - WB6RDV

2 1

Weird Question
by Jamie McElroy 02 Mar '23

02 Mar '23

Hello all, I'm still a bit of a novice but have been fortunate enough to have restored an AMI G-80 and F-80, so relatively the same in most respects but I'm learning. So here is my question. Is it possible to change the speed of the turntable motor on a AMI D-40 Jukebox from 78rm to 33rpms? I don't know if that's possible. Does anyone have any thoughts? I was hoping to restore my D-40 and play 10 inch 33 Lps on it. Please let me know if I'm just crazy or this a possibility? Thank you as always. Jamie

6 6

Seeburg Wall Box 3W1
by johngartman＠charter.net 28 Feb '23

28 Feb '23

Gentlemen, I have been on this list for a long long time, have 4 jukeboxes AMI-C, Wurlitzer 2700, and a Seeburg HF100R and an M100A. I have just picked up a 3W1 to hopefully hook up to my HF100R. Looking it over it looks like it only needs the glass dome and coin glass. Ordered from Victory Glass. I do not know much about Wall Boxes yet there is some information in my HF100R Manual. Some Questions for the Group. Looking for Gasket for the dome glass I see a set for sale for the 3WA 200 selection are they the same? I am a little confused on a Stepper? Or is that a Wurlitzer thing? Does the 3W1 just plug in to the selection receiver? I will get into the manual as soon as I have a little more time. Thanks for any help or advice you can share. John Gartman W6JPG

8 11

Testing a W1500 amplifier with a newer mechanism?
by M De Simone 28 Feb '23

28 Feb '23

Here’s a fun one! I have need to test a Wurlitzer 516 amplifier from a model 1500 but the jukebox is 2 hours away. I have a mech from a 1700 or 1800 set up that I use for testing amplifiers from about models 1800 to 2300. The 516 amplifier uses an 11 pin plug to the amplifier as does say, the 530 amplifier from a model 1900 but when I compare the schematics they appear very different. Would anyone know if I can test this amp with this mech? I do realize the 1500 uses a field coil speaker and I have an adapter for this purpose. I just don’t want to smoke any components and am concerned. Thanks, Mauro Sent from my crowded garage/shop

2 2

Ami D40 cart question
by Jukebox Repairman 28 Feb '23

28 Feb '23

I just received the above machine for repairs. It has been converted to 45 RPM PLAY utilizing the blue adapters. Mech gripper was really froze up tight. Worse one ever. That’s all set now and I was testing the mechanics by manually tripping the pinbank. The tonearm dropped to the record and after a few seconds the cartridge fell out dangling on the tonearm wire. Upon closer inspection the cartridge was held in the tonearm with a wad of now dried and hardened putty. What would be the best option for replacement cartridge for this considering it’s been converted? Thanks Rick

1 0

Seeburg STD3 selection problem
by Doug Vachon 26 Feb '23

26 Feb '23

Hi, I'm working on a Seeburg STD3 wiith a selection problem. All selections work using the battery trick but when I make a selection with the keyboard, any selection where the third digit is 9, I get 0. If I select 119, it scans and picks up 110. !29 I get 120 etc. I have the manual and Ron's microlog book. I think I read somewhere in one of the books that if it's a single selection, It's in the keyboard. Would anyone know what I would be looking at? I don't see a loose or broken wire. Thanks, Doug

1 0

Do Re Mi
by ascott822 23 Feb '23

23 Feb '23

I have a Mills Do Re Mi that is without a selection (carousel) drive motor. I have acquired one but need help wiring it in. The motor has four wires (two of course for the AC). Any diagram or drawing directing me where each of these go would be appreciated. Ascott822(a)aol.com. Sent from the all new AOL app for iOS

3 2

email change
by Doug Vachon 22 Feb '23

22 Feb '23

Hi, Could you change my email address: Old address: dvachon333(a)cogeco.ca To: dvachon3(a)teksavvy.com Thank you, Doug

1 0

2024

2023

Jukebox-list February 2023

2024

2023

Jukebox-list February 2023 ----- 2024 ----- May 2024 April 2024 March 2024 February 2024 January 2024 ----- 2023 ----- December 2023 November 2023 October 2023 September 2023 August 2023 July 2023 June 2023 May 2023 April 2023 March 2023 February 2023 January 2023

Jukebox-list February 2023