April 2026 - Jukebox-list - lists.netlojix.com

tubes
by Tony Miklos 29 Apr '26

29 Apr '26

If you are the guy that sold me tubes in the past, please send me an email. Thanks -- Tony Miklos Tony's Jukebox Repair

1 0

Seeburg TCC1
by Jukebox Repairman 28 Apr '26

28 Apr '26

A gent brought me his TCC1 to troubleshoot. I have a LPC HIdeawaythat I use as a test bed in my shop. I installed his TCC in my test bed and upon power up it scans to the right end of travel and does not transfer to reverse. The mech just sits and the end of travel and bumps trying to continue in that direction. Normally I would suspect a reversing switch but with my TCC everything works fine. There is not a test procedure in the troubleshooting section of the manual for this condition so trying to determine what component could be defective in the circuit. Looking for some help Thanks Rick <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> Virus-free.www.avg.com <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

1 0

Re: Mills dance master amp
by Kirk Van Slyke 17 Apr '26

17 Apr '26

Hello Hans, Saw this post from a few years ago. I'm doing the same as you and wondering if you could share your schematic with me? I have a schematic for the mcp-1644-B, but it's slightly different than the ones that were in the Dancemaster. Thanks! Kirk kirkvanslyke(a)hotmail.com

2 1

Mills dance master amp
by Hans Minderman 10 Apr '26

10 Apr '26

Hi All, I’m finishing up a Mills Dance Master, I have it all mechanically working and I’m now ready to work on the amp (an MCP 1644 amp). I have a schematic for it from the manual but it is not very useful because the caps and resistors are only marked with the mills ‘mcp’ catalog number and not with the actual values. The corresponding parts list has the same issue with just listing the Mills catalog numbers and not actual values. I checked with Bill Bickers at Jukebox friday night but he does not have a schematic with values or a rebuilt kit either. If anyone has a schematic or a listing of the caps and the resistors and choke for this amp please let me know. Thank you for your help. Hans Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

4 3

201 selection issue
by Jukebox Repairman 01 Apr '26

01 Apr '26

Tony, John, and group. I removed the ES from the machine, degreased / cleaned and now the machine is selecting fine. Still unsure why it was selecting fine then stopped But it’s working now and that’s good enough for me. BTW I originally posted as a 222 which was an error on my part Appreciate the help with troubleshooting Regards Rick.

1 0