January 2024 - Jukebox-list - lists.netlojix.com

Mills dance master amp
by Hans Minderman 10 Apr '26

10 Apr '26

Hi All, I’m finishing up a Mills Dance Master, I have it all mechanically working and I’m now ready to work on the amp (an MCP 1644 amp). I have a schematic for it from the manual but it is not very useful because the caps and resistors are only marked with the mills ‘mcp’ catalog number and not with the actual values. The corresponding parts list has the same issue with just listing the Mills catalog numbers and not actual values. I checked with Bill Bickers at Jukebox friday night but he does not have a schematic with values or a rebuilt kit either. If anyone has a schematic or a listing of the caps and the resistors and choke for this amp please let me know. Thank you for your help. Hans Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

4 3

Updated Wurlitzer Service Slants and Kit documents
by John Robertson 02 Feb '25

02 Feb '25

Happy New Year! I've spent a few more hours updating the web page! These are very handy to the Wurlitzer technician and worth looking at and downloading. I watermark them with flippers.com as I don't want people selling them, they should be free as long as I have any say in the matter... www.flippers.com Wurlitzer USA Service Bulletins and more! <#> 🔗 https://www.flippers.com/Wurl_USA.html <https://www.flippers.com/Wurl_USA.html> Please feel free to send me anything you have to fill my holes in the list! Thanks, John :-#)# -- John's Jukes Ltd. 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757 (Pinballs, Jukes, Video Games) flippers.com "Old pinballers never die, they just flip out"

2 2

Re: [Jukebox-list] AMI Continental 2 Microtecnica bias spring
by Federico Croci 22 Feb '24

22 Feb '24

Thanks!! > Il 17/01/2023 19:51, Chan Gade ha scritto: > Here it is on an arm in the I-200: > https://www.flickr.com/photos/90641375@N06/37325736231/ The hyperlink > probably won't get through, so copy/paste. > > Attached is a shot of the Continental 1 with counterweight. I did this > in 1986. It was necessary to cut off a small section of the mech dress > cap to clear the added counterweight. > > RobNYC -- Federico Croci wiz(a)tilt.it www.tilt.it

8 10

Administrivia: Microsoft mail bounce issue
by Jay Hennigan 13 Jan '24

13 Jan '24

Three days ago, Microsoft randomly started rejecting mail from this list, apparently as well as several others, as some sort of anti-spam measure. This caused a lot of bounces and messages about members getting unsubscribed. It affected hotmail.com, outlook.com, live.com and perhaps a few other recipient domains. I've proactively resubscribed everyone that seems to have been affected. If you find list mail being routed to your junk folder, please follow the link to choose "Trust this sender" which may help this kind of thing from happening again. I have no clue what caused it, and apparently neither does Microsoft. -- Jay Hennigan - jay(a)west.net Network Engineering - CCIE #7880 503 897-8550 - WB6RDV

5 5

Seeburg PFEA1
by Jukebox Repairman 12 Jan '24

12 Jan '24

Seeing as I had no takers on my recent NSM post I thought I’d try my luck with this one😀 When making a selection the scan control Add solenoid in the SCC stays energized after the mech starts scanning. Looking at the Schematic I see a .01 disc cap in circuit along with the service switch. I tried a different service switch with same result. If that cap has failed could this be the cause of my issue? Regards Rick

1 0

16 om vs 8 ohm
by Jim McClave 10 Jan '24

10 Jan '24

Seeburg horn tweeters.... what would be the end result if I replaced them with 8 ohm instead of 16 ohm? less volume? Jim

5 8

NSM performer grand. CD
by Jukebox Repairman 08 Jan '24

08 Jan '24

Amp is only outputting one side. I have narrowed the problem. down to the Centrale. If I swap the ribbon cables between S210 & S211 on the Centrale the amp outputs on the other side. I have the manual and the schematic is difficult to follow. There is also a learning curve as this is my first interaction with NSM and I’m looking for some guidance. Regards Rick

1 0

Rowe/AMI stepper unit
by Tony Miklos 07 Jan '24

07 Jan '24

Curious if anyone ever needs one of these. I don't recall seeing one before. Not sure if they are scarce or trash. It was in an MM6, I suppose it will work with any 1100 mech? Tony

3 5

Posting from the web interface, testing one two three
by organlists1＠sonic.net 05 Jan '24

05 Jan '24

I see other's emails, and replies, but don’t seem to see my replies. Has something changed that I do not know about? Donald R. Resor Jr. T. W. & T. C. Svc. Co. http://hammondorganservice.com Hammond USA warranty service "Most people don’t have a sense of humor. They think they do, but they don’t." --Jonathan Winters

7 10

Beta testers needed for MyVinyl
by Carl Haines 04 Jan '24

04 Jan '24

Happy New Year jukebox friends! I'm looking for current users of My Vinyl to beta test a new version of My Vinyl for both iOS devices and for the Mac. Yes, finally a version for the Mac. For iOS you need to be at least on iOS 12 and be an existing user of the app. For the Mac you need to be on macOS 10.15 or better. At least I think that is the minimum version macOS required. Please email me directly to carl(a)carlhaines.com if you are interested and let me know if you can test for iOS, Mac, or both. It may be a week or two before I have something ready for testing. What's going on with the app? I am changing out the underlying database so that I can store more information and add new features to the app. For reasons I won't detail here I was sort of locked into the original database schema which limited me from adding new features that would required additional fields in the database. As a part of adding support for a new database I had to write new code to handle the data synchronization with iCloud. Previously I was relying on technology provided by Apple which limited my visibility in what was going on with iCloud and was also one of the reasons there were issues with adding new fields to the database. I'll provide more details to the beta testers later, but the things that need to be tested is the migration of data from the old database to the new database, synchronization across devices via iCloud, and the Mac version of the app. For those that are unfamiliar and want to know what it is, information about the app can be found here https://apps.apple.com/us/app/my-vinyl-for-jukebox-owners/id500003023 Thanks Carl Haines

1 0