February 2024 - Jukebox-list - lists.netlojix.com

Wurlitzer Post Cobra Tone Arm Mech Motor Wanted
by Tony Miklos 14 Feb '24

14 Feb '24

Looking for a mech motor and mounting bracket for a Wurlitzer 1800, I don't know offhand what other models are the same. Also looking for a tone arm that will fit into an 1800 but came with a ceramic. I'll use even a newer one that no longer looks similar to the cobra, just so it fits. And it needs an amp also! Something newer is fine. I happened to have a 548 amp and plugged in the mech plug and the machine, well the selector latch solenoid turns on, don't know what older stuff might work And/Or if someone can tell me what models I have to choose from that will help my search. This box came to me missing this stuff. I didn't even notice the motor was missing also. Duh. The owner couldn't care less what the tone arm looks like, although I'll paint it red. As for originality of the amp, she doesn't care at all. I'm actually thinking of using an early stereo amp and making it stereo, but any amp that is close to plug and play will be fine. Thanks, Tony

4 8

Used parts sellers
by Tony Miklos 11 Feb '24

11 Feb '24

Who else besides Mike Florio is stripping jukes and selling used parts? Tony

3 3

looking for Southern California juke tech
by Griswold, Ted J. 11 Feb '24

11 Feb '24

Looking for someone to assist me with getting my partially rebuilt 1959 200 Play Tempo working reliably. It is close to functioning, but I need someone to help get it dependable Thoughts? Thanks Ted TED J. GRISWOLD Sun Feb 11 2024 10:13:53 This is an email from Procopio, Cory, Hargreaves & Savitch LLP, Attorneys at Law. This email and any attachments hereto may contain information that is confidential and/or protected by the attorney-client privilege and attorney work product doctrine. This email is not intended for transmission to, or receipt by, any unauthorized persons. Inadvertent disclosure of the contents of this email or its attachments to unintended recipients is not intended to and does not constitute a waiver of attorney-client privilege or attorney work product protections. If you have received this email in error, immediately notify the sender of the erroneous receipt and destroy this email, any attachments, and all copies of same, either electronic or printed. Any disclosure, copying, distribution, or use of the contents or information received in error is strictly prohibited.

1 0

OT: Mechanical Arcade games
by D. Resor 11 Feb '24

11 Feb '24

Does anyone remember a semi-mechanical question and answer game? It's been an extremely long time but I also seem to remember it had nixie tubes to display the player's score. I also seem to remember it did not have a CRT either. This particular place I seem to remember had a Seeburg 222. This was in either the late 1960s or early 1970s. Don Resor

2 2

OT: Mechanical Arcade games
by D. Resor 10 Feb '24

10 Feb '24

Does anyone remember a semi-mechanical question and answer game? It's been an extremely long time but I also seem to remember it had nixie tubes to display the player's score. I also seem to remember it did not have a CRT either. This particular place I seem to remember had a Seeburg 222. This was in either the late 1960s or early 1970s. Don Resor

1 0

AMI F and G crossovers
by joeymcd 09 Feb '24

09 Feb '24

Looking at freshening up a few AMI F and G crossovers I have. AMI F manual page 17 of the sound section shows the schematic and parts. Both capacitors are the same rated the same. The original capacitor is labeled Dry Electrolytic Motor Starting Capacitor 18-22 MFD 115 VAC 60 Cycles and is quite large. Why would AMI use this? Can something like this be used? [ https://www.solen.ca/en/products/dmpc-20 | https://www.solen.ca/en/products/dmpc-20 ] Second is the resistors used to attenuate. One is 18 ohm 4 watt and the other is 33 ohm 4 watt spec given on the parts list. Is resistor type and wattage a factor here? Can this be used? These are exact ohm rating but 10 watt. https://www.solen.ca/en/products/solen-cement-type-wirewound-resistors-wwsq… [ https://www.solen.ca/en/products/solen-cement-type-wirewound-resistors-wwsq… | https://www.solen.ca/en/products/solen-cement-type-wirewound-resistors-wwsq… ] Thanks. Joey McDonald

3 2

NSM Service Schools & Keyboard repair page updated. (and more!)
by John Robertson 09 Feb '24

09 Feb '24

Hi Folks, I now have the service school books for the ES-IV, V, V.1, and VI available for free download along with tips on rebuilding the NSM keypad keyboard here: flippers.com NSM jukebox technical tips <#> 🔗 https://flippers.com/NSM.html <https://flippers.com/NSM.html> Hope this helps! Check my other jukebox pages for lots of service bulletins - use the pull-down menu "Service & Tech Tips" at the top of each page. John :-#)# -- John's Jukes Ltd. 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757 (Pinballs, Jukes, Video Games) flippers.com "Old pinballers never die, they just flip out"

2 1

Seeburg SCD-1A - Sony player CDK-006 manual needed...
by John Robertson 08 Feb '24

08 Feb '24

Hi! Anyone had a PDF of that manual? I'd trade for a PDF of the Pioneer player... Thanks! John :-#)# -- John's Jukes Ltd. 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757 (Pinballs, Jukes, Video Games) flippers.com "Old pinballers never die, they just flip out"

7 6

2025

2024

2023

Jukebox-list February 2024