August 2023 - Jukebox-list - lists.netlojix.com

Re: [Jukebox-list] AMI Continental 2 Microtecnica bias spring
by Federico Croci 22 Feb '24

22 Feb '24

Thanks!! > Il 17/01/2023 19:51, Chan Gade ha scritto: > Here it is on an arm in the I-200: > https://www.flickr.com/photos/90641375@N06/37325736231/ The hyperlink > probably won't get through, so copy/paste. > > Attached is a shot of the Continental 1 with counterweight. I did this > in 1986. It was necessary to cut off a small section of the mech dress > cap to clear the added counterweight. > > RobNYC -- Federico Croci wiz(a)tilt.it www.tilt.it

8 10

Seeburg MRA1-L6 Audio Question
by Jukebox Repairman 30 Aug '23

30 Aug '23

I recently completed cap replacement on the above mentioned amp. Bass response is poor and no change noticeable when changing the bass pot. The only thing I did different was on the .5 cap I used same value but a higher voltage. I can’t let it go sounding like this Thoughts? Regards Rick

3 3

Long haul shipper
by Rich Myers 29 Aug '23

29 Aug '23

I have a guy interested in shipping a W2700 up to MN. I haven't shipped before and wondered if anyone has a POC for a full service blanket/wrap shipper with good results. Appreciate on the help -rich myers Get Outlook for Android<https://aka.ms/AAb9ysg>

3 2

Rock-Ola 1452
by Jason Hall 29 Aug '23

29 Aug '23

Hey. I have a 50 selection 1452 and was wondering if I can use a 120 selection WALLBOX with it. Jason

2 2

Two questions related to the need to recap
by Paul Humel 24 Aug '23

24 Aug '23

I have two questions related to the need to recap. I am going to buy a W1-L56 Wallbox to use with my Seeburg Trashcan. I'm mainly concerned about the possibility of damaging the "unobtainium" transformer due to a failed capacitor(s). I'm also concerned about my Trashcan's Master Selection Receiver because I will be plugging in all the tubes back in that are needed for the "Wireless Wallbox" section of the Receiver. My philosophies are "If it's not broken, don't try to fix it", and "If you play with something long enough you will surely break it". So, to minimize "playing with it", can I simply rely on the fuses (I'm going to add one to the Wallbox) to provide protection against damage should a capacitor(s) fail? If a fuse blows, I'll recap. Or should I just bite the bullet now and recap both the Wireless Wallbox and the Master Selection Receiver? To my knowledge the Receiver has never been recapped. It has run fine for me since I bought it in 2018 and I removed all the tubes needed for the "Wireless Wallbox" section of the Receiver. Any thoughts, please. Thanks, Paul Humel

5 6

Seeburg STD 4
by Jim McClave 23 Aug '23

23 Aug '23

Can anyone tell me the correct name of this part Im looking for? Dont have the book for reference. It is a plastic block that rides under the tormat memory unit with two metal feeler contacts on it that make contact with the memory unit for selections. I have one metal contact broken off . Also, anyone direct me to someone who might have this ? thanks .

4 3

NSM Performer Grand CD Juke
by Jukebox Repairman 19 Aug '23

19 Aug '23

First time ever having one of these NSM machines in my shop. amplifier is only outputting right channel.. Does anyone have any info on transistor cross reference from one of the us suppliers like mouser or Newark, NTE? I searched the NSM part numbers from the manual and came up empty. Regards, Rick

3 2

W2900 loading and unloading without playing.
by Shankar Singh 18 Aug '23

18 Aug '23

Am looking at a WurliTzer 2900 that was not used for about a year. When I make a selection, it loads and immediately unloads at several intervals before reaching the raised selector pin. Then it continues to load and unload without being able to press down and cancel the pin. At no time the record will play out. Grateful for some guidance to start => will save me time to troubleshoot this from scratch. Thank you SHANKAR SINGH

3 9

Seeburg juke for sale
by Gary Magwood 18 Aug '23

18 Aug '23

Hi, I have a great working '61 Seeburg Selectomatic Model #E-DS160-22 for sale. I'm located in Belleville, Ontario. How do I go about listing on your site? Thanks Gary Gary Magwood Plainfield, Ontario 613 849 1976 "The secret to living well and longer is: eat half, walk double, laugh triple, and love without measure." ~Tibetan Proverb

3 2

OMT CD slipping
by Tony Miklos 18 Aug '23

18 Aug '23

Working on a Wurlitzer OMT that had a bad CD player. I repaired the CD player and here in the shop when testing it, the turntable would sometimes turn faster than the CD and make some noise. Sometimes it would spin and play, but way too often it ends up putting the CD back and not playing it. I had thought that maybe my Rowe/AMI test juke was somehow different in the clamp arm, with less weight or something? I installed it back into the OMT and it's still spinning/slipping/putting CDs back. The round plastic pressure disc part of the clamp arm is just plastic, no metal and/or magnet. I *think* there was a magnet on the CD player that may have pulled the pressure disc, IF it had any metal in it. To add to the dilemma, the centering cone on the player was missing and I could not find it in the machine. I did install one but am not sure if that has to do with the problem. It doesn't appear to be. So should the pressure disc have a metal washer of sorts in it instead of a magnet?

3 4

2024

2023

Jukebox-list August 2023