December 2025 - Jukebox-list - lists.netlojix.com

Antique Apparatus speaker wiring?
by Tony Miklos 11 Dec '25

11 Dec '25

I have this in the shop and don't know how the factory speaker wiring was (it's all mixed up now). It has a stereo amp but only 1 woofer, 1 mid-range, and 1 tweeter. I forgot to look at the cartridge to see if the one channel is reversed like the early stereo ones. These didn't come with their own manual, only an R-91 manual which of course has left and right speakers. Also, from the factory they spliced different speaker wire around to it's hard to follow. If someone has one of these, I'd love to know what speaker wires go where (from the factory anyway) -- Tony Miklos Tony's Jukebox Repair

4 14

Jukebox Wiring
by karl hjort 11 Dec '25

11 Dec '25

Tony, This will be redundant. I responded to the thread but it was held up due to size. I was mistaken. My sister's jukebox has one woofer but two midrange and two tweeters. Has the standard Rowe crossover and transformer/speaker tap assy. I still took pictures if you want them Karl

2 2

Seeburg SE100 Golden Jet
by Jukebox Repairman 11 Dec '25

11 Dec '25

This juke doesn’t trip at end of record. Owner doesn’t have a manual and I don’t either. Can someone tell me if this trip circuit is fused or ??? I have to drive 2 hrs one way so I want to be able to correct in one visit. I remember once the magnet came off the base of the Tonearm on an S100 ( they were glued on) But owner says magnet is still in place He says it won’t trip via the reject switch either. Regards Rick

2 1

SHP3 Amp
by ROBERT wilson 04 Dec '25

04 Dec '25

Hello All, I have a SHP3 amp, when either RCA plug ( Input ) is disconnected, both channels play still play. If I remove the mute relay the sound level drops but does not quit. I have checked for shorts in the wiring, shorts on the boards, checked the diodes. I believe the problem is in the preamp section. Can someone point me in the right direction?? Thanks Robert

3 2

Output Transformer for Wurlitzer model 503 amplifier from 1015
by M De Simone 03 Dec '25

03 Dec '25

I have an amplifier to repair from a W1015 and it requires an output transformer. My usual Hammond “go to” replacements will be too tall as this one is mounted underneath the chassis. Just wondering what others use here? Preferably Hammond as I’m in Canada. Thanks, Mauro Sent from my iPhone

3 11

2026

2025

2024

2023

Jukebox-list December 2025