Hi all, My JBM200 Tropicana has gone from intermittently failing readout to now solid failure to readout and start the transfer circuit. Read in circuity is fine. The selected pin sets properly on the pin assembly. When the magazine motor starts and moves the magazine and stopping switch gear, the stopping switch finds the selected pin but jumps right over it without stopping and starting the transfer cycle. My manual shows that Control Relay R operates along with the shift solenoid through the stop switch when a pin is encountered. My question is: Where in the heck is control relay R? I've found R1, R2, and R5 but cannot find R. in the machine or the manual.
Thanks, Dean
If the search unit “jumps” over the pin you have a defective microswitch.
On Sat, Mar 9, 2024 at 7:08 PM Dean Carriveau via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
Hi all, My JBM200 Tropicana has gone from intermittently failing readout to now solid failure to readout and start the transfer circuit. Read in circuity is fine. The selected pin sets properly on the pin assembly. When the magazine motor starts and moves the magazine and stopping switch gear, the stopping switch finds the selected pin but jumps right over it without stopping and starting the transfer cycle. My manual shows that Control Relay R operates along with the shift solenoid through the stop switch when a pin is encountered. My question is: Where in the heck is control relay R? I've found R1, R2, and R5 but cannot find R. in the machine or the manual.
Thanks, Dean
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
That was be my first thought as well but it jumps both inner and outer pin tracks and I cannot locate the "R" relay that should be energized. I don't believe both micro-switches failed at the same time.
Dean
On Saturday, March 9, 2024 at 04:07:59 PM PST, Dean Carriveau via Jukebox-list jukebox-list@lists.netlojix.com wrote:
Hi all, My JBM200 Tropicana has gone from intermittently failing readout to now solid failure to readout and start the transfer circuit. Read in circuity is fine. The selected pin sets properly on the pin assembly. When the magazine motor starts and moves the magazine and stopping switch gear, the stopping switch finds the selected pin but jumps right over it without stopping and starting the transfer cycle. My manual shows that Control Relay R operates along with the shift solenoid through the stop switch when a pin is encountered. My question is: Where in the heck is control relay R? I've found R1, R2, and R5 but cannot find R. in the machine or the manual.
Thanks, Dean
_______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
I forget which, but one of those micro switches is in the circuit for both A & B sides. A bad micro switch is most likely the problem. I've seen it many times.
Tony
On 3/9/2024 8:18 PM, Dean Carriveau via Jukebox-list wrote:
That was be my first thought as well but it jumps both inner and outer pin tracks and I cannot locate the "R" relay that should be energized. I don't believe both micro-switches failed at the same time.
Dean
On Saturday, March 9, 2024 at 04:07:59 PM PST, Dean Carriveau via Jukebox-list<jukebox-list@lists.netlojix.com> wrote:Hi all, My JBM200 Tropicana has gone from intermittently failing readout to now solid failure to readout and start the transfer circuit. Read in circuity is fine. The selected pin sets properly on the pin assembly. When the magazine motor starts and moves the magazine and stopping switch gear, the stopping switch finds the selected pin but jumps right over it without stopping and starting the transfer cycle. My manual shows that Control Relay R operates along with the shift solenoid through the stop switch when a pin is encountered. My question is: Where in the heck is control relay R? I've found R1, R2, and R5 but cannot find R. in the machine or the manual.
Thanks, Dean
Jukebox-list mailing list --jukebox-list@lists.netlojix.com To unsubscribe send an email tojukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives:http://jukebox.markmail.org/ _______________________________________________ Jukebox-list mailing list --jukebox-list@lists.netlojix.com To unsubscribe send an email tojukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives:http://jukebox.markmail.org/
On 2024/03/09 7:07 p.m., Tony Miklos via Jukebox-list wrote:
I forget which, but one of those micro switches is in the circuit for both A & B sides. A bad micro switch is most likely the problem. I've seen it many times.
Tony
I completely agree with Tony, One of the first things I teach my apprentices (after the electrical safety bit) is to go for the easy fixes - test EVERY SINGLE microswitch with a continuity tester and watch for bouncing readings while tripping and afterwards. Microswitches must trip cleanly and stay tripped. No noise, just a clean closure as the switch is pushed from just activate until the button bottoms out on the body of the switch.
Any noise? Replace, retest, go on to next switch.
This fixes so many issues that the machine is often ready to go out once all the switches are dealt with.
Contacts are the biggest headache in machines.
John :-#)#
On 3/9/2024 8:18 PM, Dean Carriveau via Jukebox-list wrote:
That was be my first thought as well but it jumps both inner and outer pin tracks and I cannot locate the "R" relay that should be energized. I don't believe both micro-switches failed at the same time.
Dean
On Saturday, March 9, 2024 at 04:07:59 PM PST, Dean Carriveau via Jukebox-listjukebox-list@lists.netlojix.com wrote: Hi all, My JBM200 Tropicana has gone from intermittently failing readout to now solid failure to readout and start the transfer circuit. Read in circuity is fine. The selected pin sets properly on the pin assembly. When the magazine motor starts and moves the magazine and stopping switch gear, the stopping switch finds the selected pin but jumps right over it without stopping and starting the transfer cycle. My manual shows that Control Relay R operates along with the shift solenoid through the stop switch when a pin is encountered. My question is: Where in the heck is control relay R? I've found R1, R2, and R5 but cannot find R. in the machine or the manual.
Thanks, Dean
This is the answer here.
Check the microswitch I mentioned in my previous email which is on the left hand cam assembly by the side of the rear of the tonearm. It requires removal of the mechanism. No others on that cam assembly will cause this problem.
Check also the stopping switch itself on the rotating plate behind the search unit. There are 2 micros on there, one is the stopping switch the other is the a/b side switch.
Check the wipers at the rear of this unit (5) and clean the tracks with deoxit.
Check the detent solenoid microswitch right at the bottom middle of the mechanism in the middle of the frame by the sprag assembly.
Check the Jones plug and nylon plug connections to the R relay. I said in my other email where it is.
Your problem will likely be the cam switch micro.
Bear in mind this was a rubbish design and although the mechanics of that mechanism were all identical up to 1976, the electronics concerning this issue were fiddled with and changed almost in a yearly basis, and improved upon. The problem is that the microswitch wears and/or the cam assembly gets a little sloppy, and it doesn't switch fast enough, and before it's switched and stopped the carousel motor and engaged the transfer motor, the pin has hopped.
R relay is the symptom and not the problem. R transfers 28vac from the carousel motor to the transfer motor.
I've spent 40 years owning a Tropicana and working on the 1100 mech and know exactly all the pinch points in this circuit. R also has a cap/resistor time delay on it.
Nigel, uk
On 10 Mar 2024 at 03:30, John Robertson via Jukebox-list jukebox-list@lists.netlojix.com wrote:
On 2024/03/09 7:07 p.m., Tony Miklos via Jukebox-list wrote:
I forget which, but one of those micro switches is in the circuit for both A & B sides. A bad micro switch is most likely the problem. I've seen it many times.
Tony
I completely agree with Tony, One of the first things I teach my apprentices (after the electrical safety bit) is to go for the easy fixes - test EVERY SINGLE microswitch with a continuity tester and watch for bouncing readings while tripping and afterwards. Microswitches must trip cleanly and stay tripped. No noise, just a clean closure as the switch is pushed from just activate until the button bottoms out on the body of the switch.
Any noise? Replace, retest, go on to next switch.
This fixes so many issues that the machine is often ready to go out once all the switches are dealt with.
Contacts are the biggest headache in machines.
John :-#)#
On 3/9/2024 8:18 PM, Dean Carriveau via Jukebox-list wrote:
That was be my first thought as well but it jumps both inner and outer pin tracks and I cannot locate the "R" relay that should be energized. I don't believe both micro-switches failed at the same time.
Dean
On Saturday, March 9, 2024 at 04:07:59 PM PST, Dean Carriveau via Jukebox-listjukebox-list@lists.netlojix.com wrote: Hi all, My JBM200 Tropicana has gone from intermittently failing readout to now solid failure to readout and start the transfer circuit. Read in circuity is fine. The selected pin sets properly on the pin assembly. When the magazine motor starts and moves the magazine and stopping switch gear, the stopping switch finds the selected pin but jumps right over it without stopping and starting the transfer cycle. My manual shows that Control Relay R operates along with the shift solenoid through the stop switch when a pin is encountered. My question is: Where in the heck is control relay R? I've found R1, R2, and R5 but cannot find R. in the machine or the manual.
Thanks, Dean
-- John's Jukes Ltd. 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757 (Pinballs, Jukes, Video Games) flippers.com "Old pinballers never die, they just flip out"
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Ok I have checked the manual and it is cam switch #3 switching too slowly. Interestingly it is not mentioned in the troubleshooting for the previous years' JAL model, so I reckon it must have been a route fault reported.
My advice with the microswitches is replace it with a quality one. Not a Chinese one. The tolerance between the NO and NC on this switch is crucial. I actually got in the habit of taking the original Cherry ones apart and cleaning them up, and a really slight bending of one of the contacts internally to reduce the gap and make it switch faster.
What you may find is, you turn your jukebox on today and it works perfectly. Don't ask me why. But it will come back at some time.
Nigel, UK
-----Original Message----- From: Nigel Pugh via Jukebox-list [mailto:jukebox-list@lists.netlojix.com] Sent: 10 March 2024 03:43 To: John Robertson via Jukebox-list jukebox-list@lists.netlojix.com; John Robertson jrr@flippers.com Cc: Nigel Pugh pughn@npsyssoft.force9.co.uk Subject: [Jukebox-list] Re: AMI JBM200 Tropicana question
This is the answer here.
Check the microswitch I mentioned in my previous email which is on the left hand cam assembly by the side of the rear of the tonearm. It requires removal of the mechanism. No others on that cam assembly will cause this problem.
Check also the stopping switch itself on the rotating plate behind the search unit. There are 2 micros on there, one is the stopping switch the other is the a/b side switch.
Check the wipers at the rear of this unit (5) and clean the tracks with deoxit.
Check the detent solenoid microswitch right at the bottom middle of the mechanism in the middle of the frame by the sprag assembly.
Check the Jones plug and nylon plug connections to the R relay. I said in my other email where it is.
Your problem will likely be the cam switch micro.
Bear in mind this was a rubbish design and although the mechanics of that mechanism were all identical up to 1976, the electronics concerning this issue were fiddled with and changed almost in a yearly basis, and improved upon. The problem is that the microswitch wears and/or the cam assembly gets a little sloppy, and it doesn't switch fast enough, and before it's switched and stopped the carousel motor and engaged the transfer motor, the pin has hopped.
R relay is the symptom and not the problem. R transfers 28vac from the carousel motor to the transfer motor.
I've spent 40 years owning a Tropicana and working on the 1100 mech and know exactly all the pinch points in this circuit. R also has a cap/resistor time delay on it.
Nigel, uk
On 10 Mar 2024 at 03:30, John Robertson via Jukebox-list
jukebox-list@lists.netlojix.com wrote:
On 2024/03/09 7:07 p.m., Tony Miklos via Jukebox-list wrote:
I forget which, but one of those micro switches is in the circuit for both A & B sides. A bad micro switch is most likely the problem. I've seen it many times.
Tony
I completely agree with Tony, One of the first things I teach my apprentices (after the electrical safety bit) is to go for the easy fixes - test EVERY SINGLE microswitch with a continuity tester and watch for bouncing readings while tripping and afterwards. Microswitches must trip cleanly and stay tripped. No noise, just a clean closure as the switch is pushed from just activate until the button bottoms out on the body of the switch.
Any noise? Replace, retest, go on to next switch.
This fixes so many issues that the machine is often ready to go out once all the switches are dealt with.
Contacts are the biggest headache in machines.
John :-#)#
On 3/9/2024 8:18 PM, Dean Carriveau via Jukebox-list wrote:
That was be my first thought as well but it jumps both inner and outer pin tracks and I cannot locate the "R" relay that should be energized. I don't believe both micro-switches failed at the same time.
Dean
On Saturday, March 9, 2024 at 04:07:59 PM PST, Dean Carriveau via Jukebox-listjukebox-list@lists.netlojix.com wrote: Hi all, My JBM200 Tropicana has gone from intermittently failing readout to now solid failure to readout and start the transfer circuit. Read in circuity is fine. The selected pin sets properly on the pin assembly. When the magazine motor starts and moves the magazine and stopping switch gear, the stopping switch finds the selected pin but jumps right over it without stopping and starting the transfer cycle. My manual shows that Control Relay R operates along with the shift solenoid through the stop switch when a pin is encountered. My question is: Where in the heck is control relay R? I've found R1, R2, and R5 but cannot find R. in the machine or the
manual.
Thanks, Dean
-- John's Jukes Ltd. 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757 (Pinballs, Jukes, Video Games) flippers.com "Old pinballers never die, they just flip out"
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
_______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Tony, Nigel, John, Thank you for your detailed responses. You've given me some great advice. I haven't had the mechanism out of this machine for twenty or more years so it's about time I get it out and check those micro-switches as described. Hopefully I'll find the problem this week and let you know what it was. I really appreciate you taking the time to research and help. Dean
On Sunday, March 10, 2024 at 01:33:20 AM PST, Nigel Pugh via Jukebox-list jukebox-list@lists.netlojix.com wrote:
Ok I have checked the manual and it is cam switch #3 switching too slowly. Interestingly it is not mentioned in the troubleshooting for the previous years' JAL model, so I reckon it must have been a route fault reported.
My advice with the microswitches is replace it with a quality one. Not a Chinese one. The tolerance between the NO and NC on this switch is crucial. I actually got in the habit of taking the original Cherry ones apart and cleaning them up, and a really slight bending of one of the contacts internally to reduce the gap and make it switch faster.
What you may find is, you turn your jukebox on today and it works perfectly. Don't ask me why. But it will come back at some time.
Nigel, UK
-----Original Message----- From: Nigel Pugh via Jukebox-list [mailto:jukebox-list@lists.netlojix.com] Sent: 10 March 2024 03:43 To: John Robertson via Jukebox-list jukebox-list@lists.netlojix.com; John Robertson jrr@flippers.com Cc: Nigel Pugh pughn@npsyssoft.force9.co.uk Subject: [Jukebox-list] Re: AMI JBM200 Tropicana question
This is the answer here.
Check the microswitch I mentioned in my previous email which is on the left hand cam assembly by the side of the rear of the tonearm. It requires removal of the mechanism. No others on that cam assembly will cause this problem.
Check also the stopping switch itself on the rotating plate behind the search unit. There are 2 micros on there, one is the stopping switch the other is the a/b side switch.
Check the wipers at the rear of this unit (5) and clean the tracks with deoxit.
Check the detent solenoid microswitch right at the bottom middle of the mechanism in the middle of the frame by the sprag assembly.
Check the Jones plug and nylon plug connections to the R relay. I said in my other email where it is.
Your problem will likely be the cam switch micro.
Bear in mind this was a rubbish design and although the mechanics of that mechanism were all identical up to 1976, the electronics concerning this issue were fiddled with and changed almost in a yearly basis, and improved upon. The problem is that the microswitch wears and/or the cam assembly gets a little sloppy, and it doesn't switch fast enough, and before it's switched and stopped the carousel motor and engaged the transfer motor, the pin has hopped.
R relay is the symptom and not the problem. R transfers 28vac from the carousel motor to the transfer motor.
I've spent 40 years owning a Tropicana and working on the 1100 mech and know exactly all the pinch points in this circuit. R also has a cap/resistor time delay on it.
Nigel, uk
On 10 Mar 2024 at 03:30, John Robertson via Jukebox-list
jukebox-list@lists.netlojix.com wrote:
On 2024/03/09 7:07 p.m., Tony Miklos via Jukebox-list wrote:
I forget which, but one of those micro switches is in the circuit for both A & B sides. A bad micro switch is most likely the problem. I've seen it many times.
Tony
I completely agree with Tony, One of the first things I teach my apprentices (after the electrical safety bit) is to go for the easy fixes - test EVERY SINGLE microswitch with a continuity tester and watch for bouncing readings while tripping and afterwards. Microswitches must trip cleanly and stay tripped. No noise, just a clean closure as the switch is pushed from just activate until the button bottoms out on the body of the switch.
Any noise? Replace, retest, go on to next switch.
This fixes so many issues that the machine is often ready to go out once all the switches are dealt with.
Contacts are the biggest headache in machines.
John :-#)#
On 3/9/2024 8:18 PM, Dean Carriveau via Jukebox-list wrote:
That was be my first thought as well but it jumps both inner and outer pin tracks and I cannot locate the "R" relay that should be energized. I don't believe both micro-switches failed at the same time.
Dean
On Saturday, March 9, 2024 at 04:07:59 PM PST, Dean Carriveau via Jukebox-listjukebox-list@lists.netlojix.com wrote: Hi all, My JBM200 Tropicana has gone from intermittently failing readout to now solid failure to readout and start the transfer circuit. Read in circuity is fine. The selected pin sets properly on the pin assembly. When the magazine motor starts and moves the magazine and stopping switch gear, the stopping switch finds the selected pin but jumps right over it without stopping and starting the transfer cycle. My manual shows that Control Relay R operates along with the shift solenoid through the stop switch when a pin is encountered. My question is: Where in the heck is control relay R? I've found R1, R2, and R5 but cannot find R. in the machine or the
manual.
Thanks, Dean
-- John's Jukes Ltd. 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757 (Pinballs, Jukes, Video Games) flippers.com "Old pinballers never die, they just flip out"
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
_______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
_______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Hi Dean,
Keep us updated.
You can put a hex key into the cam pivot and turn the mechanism power off to check the positions of the cam microswitches when you reassemble them.
Have fun.
Regards
Nigel
On 10 Mar 2024 at 15:43, Dean Carriveau d.carriveau@att.net wrote:
Tony, Nigel, John,
Thank you for your detailed responses. You've given me some great advice. I haven't had the mechanism out of this machine for twenty or more years so it's about time I get it out and check those micro-switches as described. Hopefully I'll find the problem this week and let you know what it was. I really appreciate you taking the time to research and help.
Dean
On Sunday, March 10, 2024 at 01:33:20 AM PST, Nigel Pugh via Jukebox-list jukebox-list@lists.netlojix.com wrote:
Ok I have checked the manual and it is cam switch #3 switching too slowly. Interestingly it is not mentioned in the troubleshooting for the previous years' JAL model, so I reckon it must have been a route fault reported.
My advice with the microswitches is replace it with a quality one. Not a Chinese one. The tolerance between the NO and NC on this switch is crucial. I actually got in the habit of taking the original Cherry ones apart and cleaning them up, and a really slight bending of one of the contacts internally to reduce the gap and make it switch faster.
What you may find is, you turn your jukebox on today and it works perfectly. Don't ask me why. But it will come back at some time.
Nigel, UK
-----Original Message----- From: Nigel Pugh via Jukebox-list [mailto:jukebox-list@lists.netlojix.com] Sent: 10 March 2024 03:43 To: John Robertson via Jukebox-list jukebox-list@lists.netlojix.com; John Robertson jrr@flippers.com Cc: Nigel Pugh pughn@npsyssoft.force9.co.uk Subject: [Jukebox-list] Re: AMI JBM200 Tropicana question
This is the answer here.
Check the microswitch I mentioned in my previous email which is on the left hand cam assembly by the side of the rear of the tonearm. It requires removal of the mechanism. No others on that cam assembly will cause this problem.
Check also the stopping switch itself on the rotating plate behind the search unit. There are 2 micros on there, one is the stopping switch the other is the a/b side switch.
Check the wipers at the rear of this unit (5) and clean the tracks with deoxit.
Check the detent solenoid microswitch right at the bottom middle of the mechanism in the middle of the frame by the sprag assembly.
Check the Jones plug and nylon plug connections to the R relay. I said in my other email where it is.
Your problem will likely be the cam switch micro.
Bear in mind this was a rubbish design and although the mechanics of that mechanism were all identical up to 1976, the electronics concerning this issue were fiddled with and changed almost in a yearly basis, and improved upon. The problem is that the microswitch wears and/or the cam assembly gets a little sloppy, and it doesn't switch fast enough, and before it's switched and stopped the carousel motor and engaged the transfer motor, the pin has hopped.
R relay is the symptom and not the problem. R transfers 28vac from the carousel motor to the transfer motor.
I've spent 40 years owning a Tropicana and working on the 1100 mech and know exactly all the pinch points in this circuit. R also has a cap/resistor time delay on it.
Nigel, uk
On 10 Mar 2024 at 03:30, John Robertson via Jukebox-list
jukebox-list@lists.netlojix.com wrote:
On 2024/03/09 7:07 p.m., Tony Miklos via Jukebox-list wrote:
I forget which, but one of those micro switches is in the circuit for both A & B sides. A bad micro switch is most likely the problem. I've seen it many times.
Tony
I completely agree with Tony, One of the first things I teach my apprentices (after the electrical safety bit) is to go for the easy fixes - test EVERY SINGLE microswitch with a continuity tester and watch for bouncing readings while tripping and afterwards. Microswitches must trip cleanly and stay tripped. No noise, just a clean closure as the switch is pushed from just activate until the button bottoms out on the body of the switch.
Any noise? Replace, retest, go on to next switch.
This fixes so many issues that the machine is often ready to go out once all the switches are dealt with.
Contacts are the biggest headache in machines.
John :-#)#
On 3/9/2024 8:18 PM, Dean Carriveau via Jukebox-list wrote:
That was be my first thought as well but it jumps both inner and outer pin tracks and I cannot locate the "R" relay that should be energized. I don't believe both micro-switches failed at the same time.
Dean
On Saturday, March 9, 2024 at 04:07:59 PM PST, Dean Carriveau via Jukebox-listjukebox-list@lists.netlojix.com wrote: Hi all, My JBM200 Tropicana has gone from intermittently failing readout to now solid failure to readout and start the transfer circuit. Read in circuity is fine. The selected pin sets properly on the pin assembly. When the magazine motor starts and moves the magazine and stopping switch gear, the stopping switch finds the selected pin but jumps right over it without stopping and starting the transfer cycle. My manual shows that Control Relay R operates along with the shift solenoid through the stop switch when a pin is encountered. My question is: Where in the heck is control relay R? I've found R1, R2, and R5 but cannot find R. in the machine or the
manual.
Thanks, Dean
-- John's Jukes Ltd. 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757 (Pinballs, Jukes, Video Games) flippers.com "Old pinballers never die, they just flip out"
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
R relay is bottom left front corner of the mechanism frane. It's underneath a bracket with 2 sockets on, a black Jones plug and a white socket. That won't be your problem though.
There is a myriad of issues that can cause this, but check out cam microswitch, I think it's number 3 but will confirm tomorrow for you.
It is responsible for transferring power from the carousel motor to the transfer motor.
There are other bits in the circuit that can give this problem but check that first.
Nigel, uk
On 10 Mar 2024 at 01:19, Dean Carriveau via Jukebox-list jukebox-list@lists.netlojix.com wrote:
That was be my first thought as well but it jumps both inner and outer pin tracks and I cannot locate the "R" relay that should be energized. I don't believe both micro-switches failed at the same time.
Dean
On Saturday, March 9, 2024 at 04:07:59 PM PST, Dean Carriveau via Jukebox-list jukebox-list@lists.netlojix.com wrote:
Hi all, My JBM200 Tropicana has gone from intermittently failing readout to now solid failure to readout and start the transfer circuit. Read in circuity is fine. The selected pin sets properly on the pin assembly. When the magazine motor starts and moves the magazine and stopping switch gear, the stopping switch finds the selected pin but jumps right over it without stopping and starting the transfer cycle. My manual shows that Control Relay R operates along with the shift solenoid through the stop switch when a pin is encountered. My question is: Where in the heck is control relay R? I've found R1, R2, and R5 but cannot find R. in the machine or the manual.
Thanks, Dean
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/ _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
jukebox-list@lists.netlojix.com
-
Dean Carriveau -
John Robertson -
Jukebox Repairman -
Nigel Pugh -
Tony Miklos