On 2026-02-19 5:40 p.m., Jukebox Repairman via Jukebox-list wrote:
Years ago Ron Rich helped me with a 220 that was making a popping noise in the audio during scan.
I'm having the same issue with a 222 and checked my notes but couldnt find what the resolve was.
Anybody know what causes this? Its not the mute contacts. for some reason im thinking he said it was a cap but again i dont recall.
Regards, Rick
Always best to put a word or two in the subject line of what the problem is - for tracking down in the future!
As far as Ron Rich's advice I found something in the other mail list (Seeburg) where he said:
"The cause of the pop when reversing is miss-adjustment of the reversing switch, or a poor ground ("earth") connection between the mechanism and the electronics in the rear of the phono. The cause of the pop on shutting off is also poor ground connections-- Also part of this problem can be traced to a "Code A" 25 PCU-1. This must be up-dated to a "Code B".
Ron Rich"
I could not find anything specific to popping during scan for the 220 or any other models going back to 2006.
If you can recall what the conversation was about I may be able to search it better in my archives
John :-#)#