Check all ground connections, especially the RCA plug/jack on the pulse amp. Also the two large Jones plugs.
On 5/20/2024 7:22 PM, morganfield1913--- via Jukebox-list wrote:
Hello,
I have a Seeburg KD200 which has been working for 10 years.
However, now after making a selection it now plays all records sequentially starting at the position of the mechanism ignoring the selection.
I have a Service Manual which describes in detail settling and adjustments.
In order to trace this fault a 'Control Sequence Diagram' would be very useful.
I have seen Control Sequence Diagrams for later Seeburg JBs - semiconductor models which gives some information.
I have inquired on other forums without reply.
Any diagnostic information will be appreciated.
Can anyone please tell me "what is the signal or relay/solenoid that is activated when a record has been returned to the rack"?
Rod
Jukebox-list mailing list --jukebox-list@lists.netlojix.com To unsubscribe send an email tojukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives:http://jukebox.markmail.org/