Check all ground connections, especially  the RCA plug/jack on the pulse amp.  Also the two large Jones plugs. On 5/20/2024 7:22 PM, morganfield1913--- via Jukebox-list wrote:

Hello,

I have a Seeburg KD200 which has been working for 10 years.

However, now after making a selection it now plays all records sequentially starting at the position of the mechanism ignoring the selection.

I have a Service Manual which describes in detail settling and adjustments.

In order to trace this fault a 'Control Sequence Diagram' would be very useful.

I have seen Control Sequence Diagrams for later Seeburg JBs - semiconductor models which gives some information.

I have inquired on other forums without reply.

Any diagnostic information will be appreciated.

Can anyone please tell me "what is the signal or relay/solenoid that is activated when a record has been returned to the rack"?

Rod

_______________________________________________ Jukebox-list mailing list --jukebox-list@lists.netlojix.com To unsubscribe send an email tojukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives:http://jukebox.markmail.org/