June 2024 - Jukebox-list - lists.netlojix.com

1015 Fiber gear
by M De Simone 29 Jun '24

29 Jun '24

I just put a new main fiber gear in my W1015 and was wondering if it required any lubrication? I put a few drops of oil on the worm gear but I’ve heard different opinions over the years so now that it was my turn to do this I thought I’d ask the option of the group. Thanks, Mauro Sent from my iPhone

3 9

Rock-Ola 442 magazine drive gear replacement.
by Ug Lee 27 Jun '24

27 Jun '24

The time has come. The time to replace the magazine drive gear (P/N 43313) in my good ol 442. The gear presently on the machine - it has two tracks for the odd/even alternating dog (the football) to switch back and forth between - part of that "wall" separating the two tracks somehow got bent up right at the "crossover" and the dog just stops cold right there and eventually the mech fuse blows. That's just background though. I have a replacement 43313 in my little hands. I'm pleased to have it. BUT....as I look at this job....it does not look fun. Am I gonna have to take out the whole mechanism? Sure looks like it. There definitely isn't enough room in the cabinet to slide the magazine off of the main shaft. I don't mind taking out the whole mechanism, I'm not intimidated by the prospect (well maybe a bit), but it's hard to picture the process in my mind. Am I gonna need some kind of hoist? I actually have an engine lift that I use for plucking V-8's, but that seems silly.. No way I'm even starting this project without asking those who have done it before, so I'm throwing it out there! What do you guys do? What should I do? What SHOULDNT I do? Any advice/info would be greatly appreciated. I'm a careful and experienced mechanic and workman, but let's face it, in this case...I don't have a clue! Fire away! Thanks, Eli

3 2

Rowe Ami JAL tone arm adjustment
by Hans Minderman 20 Jun '24

20 Jun '24

Hi All, Working on a Rowe AMI JAL and trying to get the tone arm return height adjusted correctly. According to the manual you have to bend the tonearm rest so that the needle clears the gripper transfer arm by about 1/8”. However on the gripper arm there is small metal sleeve at the position where the back of the tone arm cartridge passes over the gripper arm. This little sleeve is not pictured in the original manual. Does the tone arm height need to be adjusted so that the cartridge clears this sleeve or is it supposed to touch it and it is ok to ‘skate’ over this sleeve? Thank you for your suggestions! -Hans Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

2 1

Capacitor Testers
by Tony Miklos 20 Jun '24

20 Jun '24

My capacitor tester died last week. It's one like this: https://www.ebay.com/p/1801512529 I really wasn't ready to spend that much, especially on something without a warranty. It's almost 45 years old. I do really like it because it's fast! I don't think it takes much more than a second or less to read capacitance and there is no range knob to turn. I do want one that tests leakage at the actual voltage. This one does go up to 600 volts, and that works for me. Is there any others out there that can compare at a lower price or is this it? I think I paid about the same 30 some years ago off my boss who bought a new one. Are any of the hand held ones worthwhile? I have one cheap multimeter that tests capacitance that seems accurate, but it takes way too long to autorange. And of course the leakage test doesn't go up to 600 volts.

1 0

Increase Bass
by Tony Miklos 14 Jun '24

14 Jun '24

Is there any way to get more bass out of an amp when using a cartridge that is lacking in bass? Tony

8 27

LPC 480 mech
by Tony Miklos 14 Jun '24

14 Jun '24

I think I've seen this problem once before but don't know what model seeburg it was. Anyway I have the LPC ready to be picked up and after several hundred test plays, the mech decides to jamb up. The motor will be on and trying to turn but no go. Turn off the motor and it sort of backs up a hair away from the side it was trying to go. For the life of me I just don't see what it is. There is a little play in there and if I toggle the reversing switch back and forth it will scan 4 or 5 spaces then jamb, flip the switch and it goes the other way. I'm pulling my hair out and I don't have much left! It isn't anything mechanical from the mech to the cabinet, when it's stuck all areas of the mech can still be wiggled around. Nothing at all like the cable getting stuck, that's for sure. I'm thinking something with the bell crank for the tone arm, but the tone arm does move left and right. Once again, I can't find my books from Ron Rich in case he has any tips for that in there. Tony

3 7

Trashcan
by Jukebox Repairman 07 Jun '24

07 Jun '24

I’m looking for an oiling diagram for a Trashcan. Does anyone have a page to scan / share? Thanks Rick

2 1

Seeburg 100W Pilasters
by Tony Miklos 06 Jun '24

06 Jun '24

I have a customer that has a W with 100C looking pilasters (light snowflake) and color cylinders. He is thinking of going original but wants to know how much he can (or I can) get for his old stuff. They will fit into a 100G but will they fit in anything else? Any ideas what they would be worth? How about to someone here? :) :) :) The color cylinders have good color and the motors are both working.

2 1

Further help with KH200
by morganfield1913＠gmail.com 05 Jun '24

05 Jun '24

Hello, I have a Seeburg KD200H which has been working for 10 years. However, now after making a selection it now plays all records sequentially starting at the position where the mechanism rested ignoring the selection. I have conducted the following: 1. Measured the Play Control 'Sub' and 'Add' solenoids - both 12Ω, 26mH 2. Replaced 12AX7 3. Replaced 56k Ω resistor in TEU 4. Checked TEU1 voyage -300VDC 5. Checked the Tormat return path 190 Ω 6. Cleaned the following: a. Play Control contacts b. Detent switch c. Tormat readout RCA connector d. All relay contacts on the Mechanism All did not fix the problem. I will appreciate your help. Thanks Rod.

1 0

2024

2023

Jukebox-list June 2024