Problem still exists , buzzing starts as soon as machine is turned on. Not coming from the speaker, as Ive un-plugged the speaker. Its coming from the mech. Stuck in play position. When I peer thru the back with a bright light I can see the clutch stuck in the upward position. Is there any way I can un-stick it with a long screwdriver , etc? I know it will need taken apart and thouroghly cleaned and re-lubed. But is there any way I can get it un-stuck? Thanks.
On 2024/05/05 7:29 a.m., Jim McClave via Jukebox-list wrote:
Problem still exists , buzzing starts as soon as machine is turned on. Not coming from the speaker, as Ive un-plugged the speaker. Its coming from the mech. Stuck in play position. When I peer thru the back with a bright light I can see the clutch stuck in the upward position. Is there any way I can un-stick it with a long screwdriver , etc? I know it will need taken apart and thouroghly cleaned and re-lubed. But is there any way I can get it un-stuck? Thanks. _________
In the M100A manual start with page 75 - that shows the circuits that energize the Trip Relay normally.
You probably have a relay where contacts are not opening properly.
John :-#)#
jukebox-list@lists.netlojix.com
-
Jim McClave -
John Robertson