I have a customer that has a CD100 that the transfer motor runs continuously. I have replaced the mech control computer (6108602) and tested the cam switches. If I stop the motor manually at a selected CD it will play the CD. The optical switches are working. The scan/transfer LED is constantly on. The board error LED is on intermittantly.
Paul do you have an error light on both mech controller and CCC?
On Thu, Sep 28, 2023 at 3:17 PM Paul Howlett via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
I have a customer that has a CD100 that the transfer motor runs continuously. I have replaced the mech control computer (6108602) and tested the cam switches. If I stop the motor manually at a selected CD it will play the CD. The optical switches are working. The scan/transfer LED is constantly on. The board error LED is on intermittantly.
-- Paul Howlett Pinball Paul's
703-361-0420 _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Just intermittent on the controller that I replaced with a known good one.
On Thu, Sep 28, 2023, 3:40 PM Jukebox Repairman via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
Paul do you have an error light on both mech controller and CCC?
On Thu, Sep 28, 2023 at 3:17 PM Paul Howlett via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
I have a customer that has a CD100 that the transfer motor runs continuously. I have replaced the mech control computer (6108602) and tested the cam switches. If I stop the motor manually at a selected CD it will play the CD. The optical switches are working. The scan/transfer
LED
is constantly on. The board error LED is on intermittantly.
-- Paul Howlett Pinball Paul's
703-361-0420 _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
So you have not tried a different CCC ? I had same issue one on a 100G and problem was CCC. I replaced the deteriorating foam backer pad and that resolved my issue. I have CCC’s available should you end up needing one.
Regards Rick
On Thu, Sep 28, 2023 at 4:38 PM Paul Howlett via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
Just intermittent on the controller that I replaced with a known good one.
On Thu, Sep 28, 2023, 3:40 PM Jukebox Repairman via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
Paul do you have an error light on both mech controller and CCC?
On Thu, Sep 28, 2023 at 3:17 PM Paul Howlett via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
I have a customer that has a CD100 that the transfer motor runs continuously. I have replaced the mech control computer (6108602) and tested the cam switches. If I stop the motor manually at a selected CD
it
will play the CD. The optical switches are working. The scan/transfer
LED
is constantly on. The board error LED is on intermittantly.
-- Paul Howlett Pinball Paul's
703-361-0420 _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
It can't be the motor, I could stop with my finger and it was still energized at both cam switch positions.
On Thu, Sep 28, 2023, 4:52 PM Jukebox Repairman via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
So you have not tried a different CCC ? I had same issue one on a 100G and problem was CCC. I replaced the deteriorating foam backer pad and that resolved my issue. I have CCC’s available should you end up needing one.
Regards Rick
On Thu, Sep 28, 2023 at 4:38 PM Paul Howlett via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
Just intermittent on the controller that I replaced with a known good
one.
On Thu, Sep 28, 2023, 3:40 PM Jukebox Repairman via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
Paul do you have an error light on both mech controller and CCC?
On Thu, Sep 28, 2023 at 3:17 PM Paul Howlett via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
I have a customer that has a CD100 that the transfer motor runs continuously. I have replaced the mech control computer (6108602)
and
tested the cam switches. If I stop the motor manually at a selected
CD
it
will play the CD. The optical switches are working. The
scan/transfer
LED
is constantly on. The board error LED is on intermittantly.
-- Paul Howlett Pinball Paul's
703-361-0420 _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to
jukebox-list-leave@lists.netlojix.com
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Can anyone tell me which pin on the CCC drives the transfer motor, there's nothing in the manual
On Thu, Sep 28, 2023, 7:31 PM Paul Howlett pinballpauls@gmail.com wrote:
It can't be the motor, I could stop with my finger and it was still energized at both cam switch positions.
On Thu, Sep 28, 2023, 4:52 PM Jukebox Repairman via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
So you have not tried a different CCC ? I had same issue one on a 100G and problem was CCC. I replaced the deteriorating foam backer pad and that resolved my issue. I have CCC’s available should you end up needing one.
Regards Rick
On Thu, Sep 28, 2023 at 4:38 PM Paul Howlett via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
Just intermittent on the controller that I replaced with a known good
one.
On Thu, Sep 28, 2023, 3:40 PM Jukebox Repairman via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
Paul do you have an error light on both mech controller and CCC?
On Thu, Sep 28, 2023 at 3:17 PM Paul Howlett via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
I have a customer that has a CD100 that the transfer motor runs continuously. I have replaced the mech control computer (6108602)
and
tested the cam switches. If I stop the motor manually at a selected
CD
it
will play the CD. The optical switches are working. The
scan/transfer
LED
is constantly on. The board error LED is on intermittantly.
-- Paul Howlett Pinball Paul's
703-361-0420 _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to
jukebox-list-leave@lists.netlojix.com
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
On 9/28/2023 3:16 PM, Paul Howlett via Jukebox-list wrote:
I have a customer that has a CD100 that the transfer motor runs continuously. I have replaced the mech control computer (6108602) and tested the cam switches. If I stop the motor manually at a selected CD it will play the CD. The optical switches are working. The scan/transfer LED is constantly on. The board error LED is on intermittantly.
Sometimes the clutch action on the motor sticks and the motor makes the mech "coast" until it gets turned on again by a cam switch. It should stop dead. When it is the clutch, you can usually hear by the noise of the motor if the power to it stops for a split second, then goes on again, that is a sure sign.
jukebox-list@lists.netlojix.com
-
Jukebox Repairman -
Paul Howlett -
Tony Miklos