What is the voltage reading at the socket where the gripper motor plugs into?  On Friday, July 5, 2024 at 08:02:10 PM EDT, Alan Segal via Jukebox-list jukebox-list@lists.netlojix.com wrote:

I am in the process of getting an AMI C jukebox to work. I am having a problem when the transfer motor attempts to lift a record. It stops at about 45 degrees, and I can manually help it finish (not sticky, moves evenly). I have previously cleaned out all the old grease from both record rack and transfer motor.

I am wondering if anyone has any suggestions. I did replace the selenium rectifier with a single phase bridge rectifier (35a, 1000 V) [no resistor added].

I am really anxious to get this tall boy working, so any ideas on how to get that transfer motor to work better would be appreciated.

https://www.taydaelectronics.com/single-phase-bridge-rectifier-mic-35a-1000v.html _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/