Check the solder joints for the pins on the board and the pins in the connector of the mech control board.

On Wed, Oct 9, 2024, 2:37 PM Jukebox Repairman via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:

I'm still working on this R89 that supposedly took a lightning hit. I believe i'm almost there but now when a selection is made you hear a click from the sprag assembly but the sprag solenoid is not activating. If i reach down and manually operate the sprag lever the mag motor starts right up as soon as i let off it stops.

Also the nag motor LED on the mech controller is lit but the detent is not? I have never seen this condition before so I'm looking for answers.

Regards, Rick _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/