This info was for an R85 amplifier which is probably the same.
You may use either the correct lamp numbers , or substitute 2 # 2182 , or #73's, for each one-- wired in series. I suggest you use some "bathtub rubber sealer', on the lamps, to attach the glass to the board.
Good luck, Mauro
Sent from my iPhone
On May 4, 2025, at 2:42 PM, M De Simone m.desimone@rogers.com wrote:
Rick,
I remember repairing one of these a few years ago and needed to replace the bulbs. I’m thinking it’s the same model? Ron Rich suggested using 2 small bulbs in series, similar to the wire lead bulbs used on 70’s Seeburgs. It worked great. I’ll see if I can find the information and let you know. Mauro
Sent from my iPhone
On May 4, 2025, at 2:16 PM, Jukebox Repairman via Jukebox-list jukebox-list@lists.netlojix.com wrote:
Does anyone know the value of the DS1 & DS2 current limiter bulbs for the volume circuit? I would like to see if any of the major semi companies have an in stock equivalent versus paying $19.00 each on ebay..
Regards, Rick _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/