I just saw that Victory Glass now has the small resistors to properly fit the OMT's. Again, not sure if it's the same as the NY NY.
Tony
On 4/9/2024 4:55 PM, Tony Miklos wrote:
I don't know if they are the same, but on a Wurlitzer OMT a heater resistor had burnt out, and it's not simple to replace it. I ended up using heat sink glue to attach two resistors to the tube. The glue wasn't as great as it could have been so I added 2 cable ties around it tightened gently when the cable ties were very warm. Works great, customer is happy.
Tony
On 4/9/2024 3:39 PM, Jukebox Repairman via Jukebox-list wrote:
John, thanks.
I made the adjustment where the plunger meets the arm. It’s not pushing it fully vertical now. It drops back down after disc meets the player. As always I appreciate your expertise and help.
Now if I can get upper arch bubble tubes to go. I checked fuses all good
Regards Rick _______________________________________________ Jukebox-list mailing list --jukebox-list@lists.netlojix.com To unsubscribe send an email tojukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives:http://jukebox.markmail.org/