I forget which, but one of those micro switches is in the circuit for both A & B sides. A bad micro switch is most likely the problem. I've seen it many times.
Tony
On 3/9/2024 8:18 PM, Dean Carriveau via Jukebox-list wrote:
That was be my first thought as well but it jumps both inner and outer pin tracks and I cannot locate the "R" relay that should be energized. I don't believe both micro-switches failed at the same time.
Dean
On Saturday, March 9, 2024 at 04:07:59 PM PST, Dean Carriveau via Jukebox-list<jukebox-list@lists.netlojix.com> wrote:Hi all, My JBM200 Tropicana has gone from intermittently failing readout to now solid failure to readout and start the transfer circuit. Read in circuity is fine. The selected pin sets properly on the pin assembly. When the magazine motor starts and moves the magazine and stopping switch gear, the stopping switch finds the selected pin but jumps right over it without stopping and starting the transfer cycle. My manual shows that Control Relay R operates along with the shift solenoid through the stop switch when a pin is encountered. My question is: Where in the heck is control relay R? I've found R1, R2, and R5 but cannot find R. in the machine or the manual.
Thanks, Dean
Jukebox-list mailing list --jukebox-list@lists.netlojix.com To unsubscribe send an email tojukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives:http://jukebox.markmail.org/ _______________________________________________ Jukebox-list mailing list --jukebox-list@lists.netlojix.com To unsubscribe send an email tojukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives:http://jukebox.markmail.org/