Drill and tap another hole to fit a metric size screw you can find in your area. On Sunday, May 5, 2024 at 10:43:45 AM EDT, Federico Croci via Jukebox-list jukebox-list@lists.netlojix.com wrote:
Hello everyone!
I have a problem with the gripper gear of my Conti2, not the one on the motor, the other one installed on the central mech. Actually, the hexagonal screw which keep the gear in its place got stripped, so I need to change it.
The screw is the hexagonal one which keep in place the F2136 gear. Here is a picture of the gear itself:
https://www.tilt.it/f2136_gear.jpg
Mine jukebox is a Microtecnica italian Conti2, but usually parts are the same as other Continentals.
Being in imperial size, not decimal, it's not an easy part to be found around here; actually, I do not even know what to look for, its real size!
If you know its size, if you have that screw, if you have the full gear complete with the screw, I'd be interested in buying it; I'm sure the screw got stripped, not sure if the hole in the gear itself it's still ok.
Thanks!