I get it. Fine tuning (LOL). Dean On Saturday, January 10, 2026 at 11:11:25 AM PST, Nigel Pugh pughn@npsyssoft.force9.co.uk wrote:
Hi Dean, Thanks for the reply. Unfortunately no, it's the only place it will now fit so I'm kind of stuck with that position. I do remember Tropicanas in bars and cafes shoved right up against a wall but commercially who would care as long as the coins went in. The issue is the sofa is in direct line of the midrange speaker so you hear a huge imbalance of mid, which in isolation of bass and treble is pretty boring. Lowering the output to the sides has absolutely solved the problem, I would just like to take it one step further now. RegardsNigel
On 10 Jan 2026 at 18:08, Dean Carriveau via Jukebox-list jukebox-list@lists.netlojix.com wrote:
Hi Nigel, It sounds like it should work. As an alternative, is there a way you can position the Tropicana in the corner of the room facing out? I keep mine in my office about eight feet behind me and like you say, that "stereo round" sound is fantastic. Dean On Saturday, January 10, 2026 at 05:09:43 AM PST, Nigel Pugh via Jukebox-list jukebox-list@lists.netlojix.com wrote:
Hi all,
For more years than I can recall, my JBM Tropicana has been across the corner of the room. Due to a room redesign it now can only go in one place, along a straight wall, one side speaker about 8 inches from the wall, and the other open to the complete room.
The rub is the one open to the complete room now faces the seating area and the direct sound from that reaches your ears before the front facing bass does. So I have midrange overload in my ear until I walk in front of the machine and then it sounds fantastic.
So I had an idea to use the speaker transformer taps to reduce both sides speaker outputs. This has absolutely fixed the issue, which I can only describe as a Rowe Ami design feature probably to show off stereo in its early days but a bit annoying.
I remember having to do this on someone's Continental 2 30 odd years ago.
Anyhow this is my ask here.
The outpost difference between the 2 speaker taps is too large. It goes from lots of side speaker output to not that much. I would like to vary it.
Could I use 2 LPADs connected to each side speaker, set them on high output tags and use the pots to lower the output to the sides ? This way I could get the precise output I want and also compensate for the fact that the other side speaker is smashing the sound up the wall which is reflecting it back more than the speaker in the open room.
Hope that makes sense - it's a question about LPADs. Are they ok with tube amps. The spec is 8ohm each side speaker.
Thanks,
Regards
Nigel
_______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
_______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/