Hi Mauro, You'll have to remove the shaft. Open the cap at the bottom of the assembly which is held in place by 2 screws. You will then see a hexagonal flat piece at the bottom of the shaft that you can unscrew from the shaft. With that piece removed you can lift the shaft out of the assembly. -Hans
Sent from my Verizon, Samsung Galaxy smartphone Get Outlook for Androidhttps://aka.ms/AAb9ysg ________________________________ From: M De Simone via Jukebox-list jukebox-list@lists.netlojix.com Sent: Wednesday, May 22, 2024 4:17:17 PM To: Jukebox mailing list jukebox-list@lists.netlojix.com Cc: M De Simone m.desimone@rogers.com Subject: [Jukebox-list] Turntable fibre gear replacement
I’ve noticed a few people replacing the main fibre gear on W61 countertop jukeboxes, I have mine apart and need to replace the turntable fibre gear. I have the assembly out of the mech and on the bench but can’t figure out how to get the shaft out of the cast metal assembly that holds the worm gear. Can it just be done as is or does this shaft have to be removed? Any insight much appreciated as I’d like to get this back together and out of my work space! Thanks, Mauro Mississauga, Ontario, Canada Sent from my iPhone _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/