Hi Jay, Thanks for responding. There are 2 mounting holes 3 5/8” apart. The height is 2 1/2” The frame width is 3 1/8” The windings are 2 1/4” wide.
Of course it’s 2 6L6G output tubes.
I just looked at the Hammond 125E and it will likely fit but I’m not sure it’s heavy enough to handle this. It’s a max output of 15W.
Mauro
Sent from my iPhone
On Dec 2, 2025, at 10:12 PM, Jay Hennigan via Jukebox-list jukebox-list@lists.netlojix.com wrote:
On 12/2/25 17:33, M De Simone via Jukebox-list wrote:
I just checked the Hammond catalog and couldn’t find one that would fit. I’m curious if others have a solution or they drill the chassis and mount a replacement topside?
Give us some more details. Maximum height, mounting hole pattern, any odd speaker taps needed, are there screen grid taps. I'm assuming a pair of 6L6s, correct?
-- Jay Hennigan - jay@west.net Network Engineering - CCIE #7880 503 897-8550 - WB6RDV
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/