Really not much to it. I use a large flat blade screwdriver and work them off a little bit at a time
On Thu, Feb 19, 2026 at 7:13 AM Steve Swaine via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
Hi Forum, Looking for help in how to do this. There are many videos on replacing the coupling but not so much for the mounts. The old mount rings look to be pressure fit on the motor and I’m not sure the best way to get them off without damaging the motor (or myself). I’m also worried about how to get the new ones on safely. The idea of whomping my motor with a big hammer is scary.
I’ve seen that some replacement motor mounts are sold as the rubber part only with the instructions to glue the new rubber to the original metal rings. But my replacements already have the rings and if there is a safe way to remove the original rings then I’d rather do that then try and get the new rings off the new rubber without damage and the trust my glue job to put them on the old rings.
Thanks! _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/