I would definitely go with the SPT-1 18. It is the correct side to use to fit accurately throughout the mechanism under the record racks and into the the soldering pins on the plugs. Lamp wire is SPT-1 16 and too large for the job in my opinion. Good luck and enjoy. The G models are some of the best sounding machines made from that era.
Jamie
On Sat, Jan 24, 2026 at 11:15 AM Jukebox Repairman via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
I looking at taking on a job to redo the wire loom on the mech. As I’m sure most of you know these 50’s AMI’s all have dried up cracking insulation
Wondering what is best gauge to replace in order to still provide flexibility for the mech to traverse and no binding on the loom.
The cabinet wiring bad too but I have that covered
Regards Rick _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/