I looking at taking on a job to redo the wire loom on the mech. As I’m sure most of you know these 50’s AMI’s all have dried up cracking insulation Wondering what is best gauge to replace in order to still provide flexibility for the mech to traverse and no binding on the loom. The cabinet wiring bad too but I have that covered Regards Rick
Hey Rick How all is well. Iirc... Lamp cord is what I recall being used. My D80 was done with it several years ago...flexible and working well. Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ From: Jukebox Repairman via Jukebox-list <jukebox-list@lists.netlojix.com> Sent: Saturday, January 24, 2026 10:14:50 AM To: Jukebox mailing list <jukebox-list@lists.netlojix.com> Cc: Jukebox Repairman <jukin510@gmail.com> Subject: [Jukebox-list] AMI G120 wiring I looking at taking on a job to redo the wire loom on the mech. As I’m sure most of you know these 50’s AMI’s all have dried up cracking insulation Wondering what is best gauge to replace in order to still provide flexibility for the mech to traverse and no binding on the loom. The cabinet wiring bad too but I have that covered Regards Rick _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
On Saturday, January 24, 2026 at 08:15:29 AM PST, Jukebox Repairman via Jukebox-list <jukebox-list@lists.netlojix.com> wrote:
Wondering what is best gauge to replace in order to still provide flexibility for the mech to traverse and no binding on the loom.
Regular SPT-1 18 gauge lamp cord is fine. There are no big currentdraws in that mechanism. I know that Ace Hardware sells it by thefoot. The same wire that's used for the cabinet lighting. David Breneman david_breneman@yahoo.com
I would definitely go with the SPT-1 18. It is the correct side to use to fit accurately throughout the mechanism under the record racks and into the the soldering pins on the plugs. Lamp wire is SPT-1 16 and too large for the job in my opinion. Good luck and enjoy. The G models are some of the best sounding machines made from that era. Jamie On Sat, Jan 24, 2026 at 11:15 AM Jukebox Repairman via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
I looking at taking on a job to redo the wire loom on the mech. As I’m sure most of you know these 50’s AMI’s all have dried up cracking insulation
Wondering what is best gauge to replace in order to still provide flexibility for the mech to traverse and no binding on the loom.
The cabinet wiring bad too but I have that covered
Regards Rick _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
SPT-1 18 Make sure it's black. Brown just doesn't look right. -- Tony Miklos Tony's Jukebox Repair On 1/24/2026 11:14 AM, Jukebox Repairman via Jukebox-list wrote:
I looking at taking on a job to redo the wire loom on the mech. As I’m sure most of you know these 50’s AMI’s all have dried up cracking insulation
Wondering what is best gauge to replace in order to still provide flexibility for the mech to traverse and no binding on the loom.
The cabinet wiring bad too but I have that covered
Regards Rick _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
-- Tony Miklos Tony's Jukebox Repair
Tony. It will definitely be black. I’m OCD. Thanks everyone for your input. Regards Rick On Sun, Jan 25, 2026 at 8:46 AM Tony Miklos via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
SPT-1 18 Make sure it's black. Brown just doesn't look right.
-- Tony Miklos Tony's Jukebox Repair
On 1/24/2026 11:14 AM, Jukebox Repairman via Jukebox-list wrote:
I looking at taking on a job to redo the wire loom on the mech. As I’m sure most of you know these 50’s AMI’s all have dried up cracking insulation
Wondering what is best gauge to replace in order to still provide flexibility for the mech to traverse and no binding on the loom.
The cabinet wiring bad too but I have that covered
Regards Rick _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
-- Tony Miklos Tony's Jukebox Repair
_______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Ahh, that's good! I just got a G out of here and I think another one is coming Saturday. I really do NOT like working on them. This one is in a firehouse and I told the chief that it's a fire hazard then showed him the zip cord. Someone already replaced the wires for the mech but they used brown. Yuck! Tony On Sun, Jan 25, 2026 at 1:25 PM Jukebox Repairman <jukin510@gmail.com> wrote:
Tony. It will definitely be black. I’m OCD. Thanks everyone for your input.
Regards Rick
On Sun, Jan 25, 2026 at 8:46 AM Tony Miklos via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
SPT-1 18 Make sure it's black. Brown just doesn't look right.
-- Tony Miklos Tony's Jukebox Repair
On 1/24/2026 11:14 AM, Jukebox Repairman via Jukebox-list wrote:
I looking at taking on a job to redo the wire loom on the mech. As I’m sure most of you know these 50’s AMI’s all have dried up cracking insulation
Wondering what is best gauge to replace in order to still provide flexibility for the mech to traverse and no binding on the loom.
The cabinet wiring bad too but I have that covered
Regards Rick _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
-- Tony Miklos Tony's Jukebox Repair
_______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
You and me both. I’m not a big fan of them either. 😁 On Thu, Jan 29, 2026 at 8:25 AM Tonys Jukebox Repair < tonysjukeboxrepair@gmail.com> wrote:
Ahh, that's good! I just got a G out of here and I think another one is coming Saturday. I really do NOT like working on them. This one is in a firehouse and I told the chief that it's a fire hazard then showed him the zip cord. Someone already replaced the wires for the mech but they used brown. Yuck!
Tony
On Sun, Jan 25, 2026 at 1:25 PM Jukebox Repairman <jukin510@gmail.com> wrote:
Tony. It will definitely be black. I’m OCD. Thanks everyone for your input.
Regards Rick
On Sun, Jan 25, 2026 at 8:46 AM Tony Miklos via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
SPT-1 18 Make sure it's black. Brown just doesn't look right.
-- Tony Miklos Tony's Jukebox Repair
On 1/24/2026 11:14 AM, Jukebox Repairman via Jukebox-list wrote:
I looking at taking on a job to redo the wire loom on the mech. As I’m sure most of you know these 50’s AMI’s all have dried up cracking insulation
Wondering what is best gauge to replace in order to still provide flexibility for the mech to traverse and no binding on the loom.
The cabinet wiring bad too but I have that covered
Regards Rick _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
-- Tony Miklos Tony's Jukebox Repair
_______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
On Thursday, January 29, 2026 at 05:28:02 AM PST, Jukebox Repairman via Jukebox-list <jukebox-list@lists.netlojix.com> wrote:
You and me both. I’m not a big fan of them either. 😁
On Thu, Jan 29, 2026 at 8:25 AM Tonys Jukebox Repair <tonysjukeboxrepair@gmail.com> wrote:
Ahh, that's good! I just got a G out of here and I think another one is coming Saturday. I really do NOT like working on them.
Mind if I ask you gents *why*?
On 2026-01-29 8:39 a.m., David Breneman via Jukebox-list wrote:
On Thursday, January 29, 2026 at 05:28:02 AM PST, Jukebox Repairman via Jukebox-list <jukebox-list@lists.netlojix.com> wrote:
You and me both. I’m not a big fan of them either. 😁
On Thu, Jan 29, 2026 at 8:25 AM Tonys Jukebox Repair <tonysjukeboxrepair@gmail.com> wrote:
Ahh, that's good! I just got a G out of here and I think another one is coming Saturday. I really do NOT like working on them. Mind if I ask you gents *why*?
I don't mind the G-80s and earlier AMIs with the bad wiring. I first ran into that problem in the early 80s when I imported a truckload of jukeboxes from Chicago - took me five years to fix and sell the fifty machines, of which maybe ten were AMIs including a pair of Conti's! Those were the days!! Anyway the machines are reasonably reliable, and rewiring them doesn't take that long. Consider replacing the Cam blade switches with the CAM-1 microswitch option (from the UK) that I sell, that solves so many problems on these machines! No more jammed motors blowing the 8/10A fuse, or readout clearing coils smoking out! John :-#)# -- John's Jukes Ltd. 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757 (Pinballs, Jukes, Video Games) flippers.com "Old pinballers never die, they just flip out"
participants (7)
-
David Breneman -
Jamie McElroy -
John Robertson -
Jukebox Repairman -
Rich Myers -
Tony Miklos -
Tonys Jukebox Repair