I have a Wurlitzer Model 1015 00 (OMT). I had converted it to a PRO player years ago and it worked fine. Now the player stopped working. I swapped it with another player with the same results. I also put it's player in my test machine and it worked fine.
Turning is on, it shows a flashing 8 in the credit display and on the player control board (not sure of that name), upon power up it shows: 0140 pause, 0607 pause, 4 pause, 0 that stays lit. I have no paperwork that tells me what the 3 buttons on that board are, but if I press the top/rear button to turn the number to 5, then press the lower/first button, it will play the entire CD. Fiddling around with it I can make it play different tracks. The cancel button on the rear of the box does nothing.
The Interface board (about 2.25" x 9") is quite dark from heat up where the electronics are. I just found a schematic for the interface board that it called a "plug connector CD" that looks to be right but I haven't got to dig into it yet.
So after this long verbose ramble I ask should I look for a problem in that "plug connector" board or the board below the player with the 3 buttons and a single digit display?
Also what are the three buttons that aren't labeled? That would be nice to know.
To top things off, at the location of the box, I could select a song and it would select the CD, try to play it, then put it back. Then the owner took it to me, on it's back with the shipping bolts barely threaded in. Now it doesn't select anymore. Just the flashing 8. The cable that goes behind the mech looks and tests OK, but it could be intermittent.
Any help appreciated,