May 2024 - Jukebox-list - lists.netlojix.com

Increase Bass
by Tony Miklos 14 Jun '24

14 Jun '24

Is there any way to get more bass out of an amp when using a cartridge that is lacking in bass? Tony

8 27

SHFA1, 2, 4.. Mute/Squelch plug 5 pin
by Tony Miklos 31 May '24

31 May '24

Anyone have a mute/squelch 5 pin plug for sale? I may have a plug you need for trade. Tony

2 4

W61 Continued issue
by M De Simone 28 May '24

28 May '24

Still working on the model 61. With the help of Hans I was able to replace the fibre gear, it went together well and works fine. (Thank you Hans) The problem now is that it keeps picking up the same record and the selector never searches. The problem is that at the end of the cycle the clutch does not reset forward and engage the selector gear. However if I advance the mech a bit it will do what it’s supposed to do. I’ve done the timing at least 5 times but it hasn’t corrected the problem, I’ve even tried advancing the timing a bit and retarding it a bit and still no luck so I just set the gear back to where it’s supposed to be. Is there an adjustment to make the motor run a bit longer? I’ve read the manual cover to cover but no mention of this. In the troubleshooting section it says to do the timing, but as I stated, this did not solve the issue. Any ideas much appreciated. Mauro Sent from my iPhone

2 2

Seeburg KD200 Plays Continously
by Glenis&Rod 23 May '24

23 May '24

Hello, I have a Seeburg KD200 which has been working for 10 years. However, now after making a selection it now plays all records sequentially starting at the position of the mechanism ignoring the selection. I have a Service Manual which describes in detail settling and adjustments. In order to trace this fault a 'Control Sequence Diagram' would be very useful. I have seen Control Sequence Diagrams for later Seeburg JBs - semiconductor models which gives some information. I have inquired on other forums without reply. Any diagnostic information will be appreciated. Can anyone please tell me "what is the signal or relay/solenoid that is activated when a record has been returned to the rack"? Rod

2 1

Turntable fibre gear replacement
by M De Simone 22 May '24

22 May '24

I’ve noticed a few people replacing the main fibre gear on W61 countertop jukeboxes, I have mine apart and need to replace the turntable fibre gear. I have the assembly out of the mech and on the bench but can’t figure out how to get the shaft out of the cast metal assembly that holds the worm gear. Can it just be done as is or does this shaft have to be removed? Any insight much appreciated as I’d like to get this back together and out of my work space! Thanks, Mauro Mississauga, Ontario, Canada Sent from my iPhone

3 2

Seeburg KD200 plays continuously
by morganfield1913＠gmail.com 21 May '24

21 May '24

Hello, I have a Seeburg KD200 which has been working for 10 years. However, now after making a selection it now plays all records sequentially starting at the position of the mechanism ignoring the selection. I have a Service Manual which describes in detail settling and adjustments. In order to trace this fault a 'Control Sequence Diagram' would be very useful. I have seen Control Sequence Diagrams for later Seeburg JBs - semiconductor models which gives some information. I have inquired on other forums without reply. Any diagnostic information will be appreciated. Can anyone please tell me "what is the signal or relay/solenoid that is activated when a record has been returned to the rack"? Rod

2 1

Rowe R-81 Memory Unit
by Tony Miklos 19 May '24

19 May '24

Is there any hope for finding a known good replacement memory unit #601-07666? I don't recall the condition of the bad board, last I saw it was 10? years ago and I couldn't find a replacement then.

3 4

Wurlitzer 1800 Pilaster Insert
by Tony Miklos 15 May '24

15 May '24

Is anyone reproducing the color and pattern insert for the wurlitzer 1800? I know Victory Glass has the glass, but they don't have the inner insert thingy. Thanks, Tony

3 7

Seeburg Q Stereo Crossover network & speakers needed
by Tony Miklos 14 May '24

14 May '24

Someone decided to make this Q better than factory and installed two new speakers, disconnected the mid-range speaker, and removed the crossover network. I'm not so sure if I need the speakers, but the crossover network would be very nice to have. Come to think of it, I'll have to test the mid/high range speaker.

2 1

Help with Seeburg KD200
by morganfield1913＠gmail.com 07 May '24

07 May '24

Hello, I have a Seeburg KD200 which I have enjoyed for many years - recently the mechanism travels back and forth continuously and the keyboard is not active, ie. No sound of relays when a selection is made. I checked the voltage at the Tormat Electronic Unit (Type TEU-1) to be OK at -300V. The fault may be around the 'Write-In' circuits but I need some help in the diagnosis. I have a service manual. I will appreciate any suggestions. Regards Rod George Australia.

3 4

2024

2023

Jukebox-list May 2024