Your problem is a lubrication issue but not in the area you are addressing. The clutch on the backside of the mech (carriage) is your problem area
On Sun, Jun 18, 2023 at 4:36 PM Kent Z via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
When the mechanism attempts to load or unload record, the cam turns about halfway and sits and the mech chatters. Its stuck until I help it by pulling back on the clamp arm assembly, then it completes the unload cycle. Loading record is the same issue. I have oiled the cam and clamp arm area that I can reach from the front. Any ideas? Kent
Sent from Mailhttps://go.microsoft.com/fwlink/?LinkId=550986 for Windows
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/