Unfortunately I don't have the parts with me so I can't measure anything.
Yes on the shortening of the pin/making sure it is centered. I had one that was off a hair many years ago and it scored the other piece and took me forever to get it to slide perfectly smooth again!
On 5/24/2023 11:39 AM, ron jukebox wrote:
On my Rockola CD8, the pin is 1/8 x 15/16.
If you measure the Cam Gripper (the piece that the pin goes into), and subtract about 1/16".
It is CRUCIAL that when you reinstall the pin, that it does not protrude out on either side, but is instead slightly recessed.
Hope that helps.
On Wednesday, May 24, 2023 at 06:37:55 AM EDT, Tony Miklos jukeboxandpinball@gmail.com wrote:
On 5/23/2023 4:39 PM, ron jukebox wrote: Every thing I have ever read says it is 1/8" roll pin.
Thanks, I also need the length,