[Jukebox-list] Rowe Ami JAL tone arm adjustment

Hi All,

Working on a Rowe AMI JAL and trying to get the tone arm return height adjusted correctly. According to the manual you have to bend the tonearm rest so that the needle clears the gripper transfer arm by about 1/8”. However on the gripper arm there is small metal sleeve at the position where the back of the tone arm cartridge passes over the gripper arm. This little sleeve is not pictured in the original manual. Does the tone arm height need to be adjusted so that the cartridge clears this sleeve or is it supposed to touch it and it is ok to ‘skate’ over this sleeve? Thank you for your suggestions! -Hans

Sent from Mailhttps://go.microsoft.com/fwlink/?LinkId=550986 for Windows