On Saturday, March 30, 2024 at 12:12:41 PM PDT, Jim McClave juker17@yahoo.com wrote:
Thanks, this is a worst-case scenario problem. Someone else was working on it> years ago. So far, I have discovered the 2050 tube missing, the reject switch 2> wires on the back with 2 wires pulled off the plug, and each wire connected to> each end of the visible fuse on the wsr, I also have found the larger plug that is> supposed to plug into the credit unit plugged in to the 6sl7 plug in the amp instead,> and the 6sl7 tube is currently missing. Loud buzzing as soon as you turn it on. The> mech wont move, and the turntable sits and spins. wont reject. Jim
The machine will operate fine without the 2050 tube. It's only needed whenyou use wallboxes. I had a problem with mine long ago where the coil openedon the selection timing relay. This caused the credit solenoid to stay activatedand it did make a very loud buzzing noise. So as you know, the first step is tosee what's buzzing and fix that, so the machine can be put in a known point inthe play cycle. The fact that the buzzing starts as soon as the machine is turnedon indicates it's coming from an electro-mechanical rather than audio source.