On 7/12/2024 8:50 PM, John Robertson via Jukebox-list wrote:
On 2024/07/12 5:37 p.m., Don R via Jukebox-list wrote:
Ron Rich probably knew what you were going to type before you did it. ;)
Don Resor
Sent from someone's iPhone
On Jul 12, 2024, at 4:51 PM, Tony Miklos via Jukebox-list jukebox-list@lists.netlojix.com wrote:
I put a new (used) clutch in because the old one somehow had the worm gear stripped.
Often when it went to the right side and then reverses, it gets stuck and just slips. I went over the rubber stop and the reverse trip adjustments and it is working much better, I actually counted and it worked properly 100 times in a row. If I make it change direction before it gets to either end, it changes direction no problem at all, ever. (I hope Ron isn't reading this and knows that I was hitting the reversing switch by hand) :)
It was acting up whenever changing from the right side to the other direction but the adjustments cured that. What remains is that if I play the last record on the right, A or B side, it then gets stuck again. Pushing the mech quickly to the left will engage the clutch and all it well until I select the last selection.
Any ideas? I'm about ready to tell the customer not to play the last selection! (not really)
Tony
As I recall the Clutch Tower Assy is different for the LPC-480 series machine, so was your replacement from a LPC-480 machine?
I'm away from the shop until Tuesday so can't check my parts manuals though, so could be wrong...won't be the first time!
John :-#)#
The clutch is from an LPC. It has the little spring thing down at the clutch. Tony