On 2024/04/19 9:16 a.m., Jukebox Repairman via Jukebox-list wrote:
Had everything working as it should. New issue is carousel goes just slightly past selected disc so gripper misses it. Would this be optic sensor adjustment?
Regards Rick _________
There is no adjustment for the optical sensor. This sounds more like a lubrication issue - perhaps the scan solenoid is gummed up?
Use the Service mode and check if the carousel stops as soon as you release button #8! If must drop out with a nice solid THUNK. Perhaps the plunger has been oiled in the past and is now gumming up.
There is a chance that the latch solenoid gap is off...according to the manual - "*(latch solenoid) M3 has to pull the latch arm enough to give a clearance of 1 - 2mm (from the top of the teeth). To check, push in M3's armature manually (the plunger, not the arm nor the linkage) and watch for one rotation. For an adjustment, advance of retard M3 stopper core (slot screw at rear of M3, 17mm spanner for the lock nut).*"
John :-#)#