I think you are probably right. That does make sense. It will become an ornament now 😀
Regards
Nigel, uk
On 12 Jun 2024 at 16:42, David Breneman david_breneman@yahoo.com wrote:
On Wednesday, June 12, 2024 at 05:53:15 AM PDT, Nigel Pugh via Jukebox-list jukebox-list@lists.netlojix.com wrote:
When it first stopped working, I slowly pulled it out and it started working again. I thought it was a bad connection so I tensioned
up the base sockets a little on the amp. Made no difference and
the 2 old tubes still worked ok.
Them after a few days of adjusting it's position on the base, it stopped completely. Heater does not glow either.
If the tubes you swapped it out with work fine, I'd bet it's the
filament. Moving the tube in the socket might have jiggled it
enough to momentarily make contact.