[Jukebox-list] Re: Microtecnica Conti2 reset solenoid faulty

Hello again!

Il 17/05/2023 10:51, Nigel Pugh ha scritto:

Also check the pusher arm that it operates hasn't seized up. It may need lubricating on the pivot.

Bingo!

The plastic link operated by the coil was broken. I changed it, and everything is working as it should again.

I'd like to add one (or two) fuse for the two reset solenoids. The impulse should start from the two transfer switches, then routed to the coils through the contacts on the bottom front of the record magazine.

Someone alredy tried this?