Double check that there is no slack in the chain when traveling in that direction. When the mech stops to pick a record, see if you can move it back and forth . It should stay still. If that checks ok, most likely your mech is stopping slightly too late so the gripper is not perfectly aligned with the center of the record slot. You need to adjust the fixed blade of the odd side carriage stop switch so that the contacts close sooner. Bend the center stiffening blade towards the movable blade so that the gap between contacts is smaller. The manual gives clear instructions with pictures for this adjustment. Good luck, Jim On Tuesday, November 28, 2023 at 10:39:45 AM EST, Jamie McElroy via Jukebox-list jukebox-list@lists.netlojix.com wrote:
Hell all, can anyone help me with this problem please. When a even selection of a record is made the gripper arm returns the record to the proper slot it was selected from. However, when an odd selection is made and played, the gripper returns the record into the next slot on the record rack. This does not happen every time but 85% of the time it will when an odd selection is made. Any thoughts on this please. I'm going a bit crazy with it. Thank you for your help.
Jamie _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/