So you have not tried a different CCC ? I had same issue one on a 100G and problem was CCC. I replaced the deteriorating foam backer pad and that resolved my issue. I have CCC’s available should you end up needing one.
Regards Rick
On Thu, Sep 28, 2023 at 4:38 PM Paul Howlett via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
Just intermittent on the controller that I replaced with a known good one.
On Thu, Sep 28, 2023, 3:40 PM Jukebox Repairman via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
Paul do you have an error light on both mech controller and CCC?
On Thu, Sep 28, 2023 at 3:17 PM Paul Howlett via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
I have a customer that has a CD100 that the transfer motor runs continuously. I have replaced the mech control computer (6108602) and tested the cam switches. If I stop the motor manually at a selected CD
it
will play the CD. The optical switches are working. The scan/transfer
LED
is constantly on. The board error LED is on intermittantly.
-- Paul Howlett Pinball Paul's
703-361-0420 _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/