I have a Continental 1 which was working fine and I decided it was time to replace the ac chords on the mechanism. I removed the mech, removed the turntable and the gripper motors, replaced the zip chords and put it back together. It started picking every selection and immediately rejecting them as soon the needle made contact so I figured I had to reset the transfer motor as per the service manual. I did so carefully and adjusted all 6 microswitches but the problem still persist. It also seems the gripper and record are a bit out of alignment. Before I start adjusting everything and potentially worsening the issue I thought it best to deal with the selection and rejection issue first. I have reread the manual but still have no idea what could cause this? The end of record switch is not activated. Looking to the group for some guidance here. Thank you, Mauro Mississauga, Ontario
Sent from my iPhone