You can not apply old adages across the board.
Look, this is 75 year old electronics. It was built along commercial standards that are a notch above consumer grade (mostly). At this point you are about 62 years past the intended machine service life.
Be thankful of the fact that these are simple electronic devices which can be rebuilt and not full of LSI proprietary/obsolete components.
DIY'it or have it done. The unit probably won't work properly without it.
RobNYC
On Wednesday, August 23, 2023 at 08:05:20 AM GMT-8, Paul Humel via Jukebox-list jukebox-list@lists.netlojix.com wrote:
I have two questions related to the need to recap.
I am going to buy a W1-L56 Wallbox to use with my Seeburg Trashcan. I'm mainly concerned about the possibility of damaging the "unobtainium" transformer due to a failed capacitor(s). I'm also concerned about my Trashcan's Master Selection Receiver because I will be plugging in all the tubes back in that are needed for the "Wireless Wallbox" section of the Receiver.
My philosophies are "If it's not broken, don't try to fix it", and "If you play with something long enough you will surely break it".
So, to minimize "playing with it", can I simply rely on the fuses (I'm going to add one to the Wallbox) to provide protection against damage should a capacitor(s) fail? If a fuse blows, I'll recap.
Or should I just bite the bullet now and recap both the Wireless Wallbox and the Master Selection Receiver? To my knowledge the Receiver has never been recapped. It has run fine for me since I bought it in 2018 and I removed all the tubes needed for the "Wireless Wallbox" section of the Receiver.
Any thoughts, please.
Thanks,
Paul Humel
_______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/