Hi Federico,
If you remove or tape up th switch activator, does the arm work ok then ? I just want to rule out stuff cartridge wire or something like that?
The AT3600 can track at 4 grams so I suspect it is the stiffness of your switch. I have replaced a couple with modern equivalents of the low pressure switch and they are worse than the original.
They are on Ami HIJK and continentals, not the later Rowe Amis..
I have replaced some entirely with a magnetic reed switch in the past. This seems to work.
You may want to try disassembling your existing switch (can be done with care), cleaning the contacts and making sure the tension is reduced somehow.
The anti skate spring won't make a difference to this problem, in fact it will make it worse. It's not really necessary for tracking at 4 grams anyway.
A good original switch will work perfectly with modern cartridges tracking at 3 grams, so it's likely your switch needs some maintenance.
Regards,
Nigel, uk
On 16 Jan 2023 at 13:59, Federico Croci via Jukebox-list jukebox-list@lists.netlojix.com wrote:
Hello everyone!
I'm working on a Conti2, italian Microtecnica version.
I installed a new Audio Technica Stilo (Atn3600l), but I still have some trouble playing some 45s, towards the end of the records, when the tone arm begins to push on the switch for the end of the record.
The reset microswitch it's the original one, maybe it could be changed with some other model...?
Also, the Microtecnica version it's missing the bias spring I can see in the Conti2 manual. Just wondering if someone has a full kit to sell (I'm missing everything, the orange metal support part, as well as the spring itself), or if it can be bought somewhere.
Thanks!
-- Federico Croci wiz@tilt.it www.tilt.it
Jukebox-list mailing list Jukebox-list@lists.netlojix.com http://lists.netlojix.com/mailman/listinfo/jukebox-list Searchable Archives: http://jukebox.markmail.org/