[Jukebox-list] Re: Seeburg R Mech Lighting

On 2024-08-26 10:09 a.m., Jukebox Repairman via Jukebox-list wrote:

I Have an R I'm working on and typical only one side of the 100 end cap lighting works. The strange thing is I have 6V at the center pin of the socket. I've tried 3 different bulbs thinking maybe the bulb wasn't making good connectivity but no go.

It seems like every R that I have restored has had this issue. Any thoughts on a fix?

It's the only thing holding me up on completion of the job

Regards, Rick _____

If you have 6V on the center terminal of the lamp socket, perhaps the lamp socket shell is too loose to make a ground connection. Check using the shell and the centre terminal, then if Zero V check the center terminal and the shell's mounting arm...

John :-#)#