Hi all,
I was hoping for a little advice please.
My Wurlitzer 2410S has just stopped working, the selector buttons do not seem to be engaging when pressed.
I’ve read the manual and troubleshooting but can’t properly identify the problem/solution. It points to cleaning and adjusting the N. C control contacts as shown on page 12, but I don’t understand the instructions.
Can anyone point me in the right direction?
Many thanks Jon
Sent from my iPad
On 29 Dec 2022, at 21:40, Thomas Lee via Jukebox-list jukebox-list@lists.netlojix.com wrote:
The manual show have the specs?
On Thu, Dec 29, 2022, 1:38 PM rollin gvtc via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
I believe the E80 and the E120 use two belts.motor to idler pulley, and idler pulley
to turntable. I think they are the same two belts for the 80 and the 120.
-- This email has been checked for viruses by AVG. https://www.avg.com _______________________________________________ Jukebox-list mailing list Jukebox-list@lists.netlojix.com http://lists.netlojix.com/mailman/listinfo/jukebox-list Searchable Archives: http://jukebox.markmail.org/
Jukebox-list mailing list Jukebox-list@lists.netlojix.com http://lists.netlojix.com/mailman/listinfo/jukebox-list Searchable Archives: http://jukebox.markmail.org/