I would check all your resistors particularly the ones over 100k or high wattage. Also plate voltage on the tubes.
On Sun, Sep 24, 2023 at 4:38 PM Jukebox Repairman via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
I just finished installing a replacement cap kit in the above-mentioned amp. It is being used in a M100C. Using a redhead cartridge (with good needles) I'm finding the output of the amp is poor. Even with the volume maxed the output is nominal.
I tested the tubes and the 6V6 drivers only read in the 50 percent range. A couple were 51 -52 but still low.
Do you think a fresh set of tubes will increase the output?
Regards, Rick _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/