July 2024 - Jukebox-list - lists.netlojix.com

How to wire remote cancel button on DS-100
by bpoldstyle＠yahoo.com 15 Aug '24

15 Aug '24

I recently added a remote cancel button to my Seeburg 222 by wiring it to terminals 2 and 3 on the record cancel terminal strip on the tormat selector unit. Now my cousin has asked me to add the same type of remote cancel switch to his DS-100. Looking online I noticed that his record cancel terminal strip has four terminals (the 222 has only three terminals). I believe the extra terminal supplies DC to a motorized remote volume control if that is added on. All we want to do is add a remote cancel button. Which two terminals should we use for the cancel button hook-up? Thanks in advance, Bruce

2 2

Rock-Ola MZ8-1
by Tony Miklos 25 Jul '24

25 Jul '24

A customer bought one and I've never seen inside one yet. I guess it's touch screen. Will they work with what songs are downloaded on them without being hooked up to the internet? It came from a Texas Roadhouse. It looks like quite a few of these were auctioned off, not sure why. The customer can't tell me much about it except "it's a bubbler". He wants me to come and show him how to make it work. I don't see a manual for it on the Rock-Ola website. Tony

1 0

Want to disable my Rockola 1493 princess intermix option
by Allen Mamet 23 Jul '24

23 Jul '24

I have a what i guess is the intermix platter on my princess, my issue is i have a few 7” 45’s with the small hole. How do i “disable” the feature that changes the speed to 33 1/3 when those small hole 45’s are placed on the platter? I’d rather not cut a larger hole in the 45 Thx Allen Sent from Altair IV

5 7

Seeburg inductor
by Paul Howlett 18 Jul '24

18 Jul '24

What size is the inductor on the detent switch in a LPC-1. The original got smashed.

2 1

WurliTzer 2900 lower lamp
by Shankar Singh 14 Jul '24

14 Jul '24

Would appreciate some pictures from someone who has a WurliTzer 2900, of the fluorescent lamp below the selection keyboard. Would like to see its position and how the end tips are mounted. Thank you Shankar Singh

1 0

Another problem child, Wurlitzer 2810 not selecting
by Tony Miklos 13 Jul '24

13 Jul '24

I have a 2810 in for some work. Got everything fixed and testing it yesterday it suddenly stopped selecting. It was set on free play when it came in and that worked fine. (It had some funny little clip on the free play button to make it stay on.) It was working perfectly. I had tested it for some time, then suddenly when making a selection, the buttons latch in and that's it. Both latch solenoids are engaged and the associated contacts are cleaned and adjusted. I did go through the troubleshooting menu in the manual but didn't find anything. Any ideas? Thanks, Tony

2 3

Re: Another problem child, Wurlitzer 2810 not selecting
by Shankar Singh 13 Jul '24

13 Jul '24

Try cleaning the switches for the relays on the junction box. Shankar Singh On Jul 13, 2024, at 09:04, Tony Miklos via Jukebox-list <jukebox-list(a)lists.netlojix.com> wrote: I have a 2810 in for some work. Got everything fixed and testing it yesterday it suddenly stopped selecting. It was set on free play when it came in and that worked fine. (It had some funny little clip on the free play button to make it stay on.) It was working perfectly. I had tested it for some time, then suddenly when making a selection, the buttons latch in and that's it. Both latch solenoids are engaged and the associated contacts are cleaned and adjusted. I did go through the troubleshooting menu in the manual but didn't find anything. Any ideas? Thanks, Tony _______________________________________________ Jukebox-list mailing list -- jukebox-list(a)lists.netlojix.com To unsubscribe send an email to jukebox-list-leave(a)lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/

2 1

LPC 480
by Tony Miklos 13 Jul '24

13 Jul '24

I put a new (used) clutch in because the old one somehow had the worm gear stripped. Often when it went to the right side and then reverses, it gets stuck and just slips. I went over the rubber stop and the reverse trip adjustments and it is working much better, I actually counted and it worked properly 100 times in a row. If I make it change direction before it gets to either end, it changes direction no problem at all, ever. (I hope Ron isn't reading this and knows that I was hitting the reversing switch by hand) :) It was acting up whenever changing from the right side to the other direction but the adjustments cured that. What remains is that if I play the last record on the right, A or B side, it then gets stuck again. Pushing the mech quickly to the left will engage the clutch and all it well until I select the last selection. Any ideas? I'm about ready to tell the customer not to play the last selection! (not really) Tony

4 5

Re: W2900 Problems
by Shankar Singh 12 Jul '24

12 Jul '24

Good news to report! The motor shaft and drive wheel axis had no left-right/top-bottom moment. But they had push-pull movement. I replaced the turntable belt and switched over the sleeve from a newer motor shaft to replace the pitted one I had. I was surprised at the difference it made. The annoying noise was gone! Just have to remove the back-stop pawls to clean them… again… (groan…) Thanks again John! SHANKAR SINGH On Jul 11, 2024, at 16:14, John Robertson via Jukebox-list <jukebox-list(a)lists.netlojix.com> wrote: On 2024/07/11 8:35 a.m., Shankar Singh via Jukebox-list wrote: > I am now playing this juke after a couple years rest. Cleaning all the relays and switches made it operational again. 2 annoying issues prevail- > > 1. Back Stop Pawl keeps sticking. > I sprayed a few drops of auto parts cleaner at the pivot. It frees up for a few hours and then sticks again to cause wrong odd side selections. > Any suggestions? Trying to avoid removing and washing. Did the factory paint around the pawl frame for reference? Do that with a black marker, then remove and wash thoroughly in solvent. Do both sides. > 2. Turntable motor noise. > This noise is not heard through the speakers. > But it sounds loud before and after the music drowns it out. > > If I push off the drive wheel from the motor sleeve, you can barely hear the disengaged motor spinning by itself. Could the arm that the drive wheel spins on have a problem? Any play in the drive wheel axis? Side to side, or up/down? May need to having bushings added > The sleeve seems pitted. I think this could have been done years ago to avoid issues from hardened drive wheel tyre. Which sleeve? > Could the belt or rubber mounts cause this? Remove belt, if sound vanishes check turntable assembly for play.I assume the belt is nice and flexible. Are any of the motor mounts cracked or rock hard? They should be flexible...I stock those as do others. > Any advice would be appreciated. > > Thank you. > > Shankar Singh You are welcome! John :-#)# -- John's Jukes Ltd. 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757 (Pinballs, Jukes, Video Games) flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Jukebox-list mailing list -- jukebox-list(a)lists.netlojix.com To unsubscribe send an email to jukebox-list-leave(a)lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/

1 0

Re: W2900 Problems
by Shankar Singh 12 Jul '24

12 Jul '24

Good news to report! The motor shaft and drive wheel axis had no left-right/top-bottom moment. But they had push-pull movement. I replaced the turntable belt and switched over the sleeve from a newer motor shaft to replace the pitted one I had. I was surprised at the difference it made. The annoying noise was gone! Just have to remove the back-stop pawls to clean them… again… (groan…) Thanks again John! SHANKAR SINGH On Jul 11, 2024, at 16:14, John Robertson via Jukebox-list <jukebox-list(a)lists.netlojix.com> wrote: On 2024/07/11 8:35 a.m., Shankar Singh via Jukebox-list wrote: > I am now playing this juke after a couple years rest. Cleaning all the relays and switches made it operational again. 2 annoying issues prevail- > > 1. Back Stop Pawl keeps sticking. > I sprayed a few drops of auto parts cleaner at the pivot. It frees up for a few hours and then sticks again to cause wrong odd side selections. > Any suggestions? Trying to avoid removing and washing. Did the factory paint around the pawl frame for reference? Do that with a black marker, then remove and wash thoroughly in solvent. Do both sides. > 2. Turntable motor noise. > This noise is not heard through the speakers. > But it sounds loud before and after the music drowns it out. > > If I push off the drive wheel from the motor sleeve, you can barely hear the disengaged motor spinning by itself. Could the arm that the drive wheel spins on have a problem? Any play in the drive wheel axis? Side to side, or up/down? May need to having bushings added > The sleeve seems pitted. I think this could have been done years ago to avoid issues from hardened drive wheel tyre. Which sleeve? > Could the belt or rubber mounts cause this? Remove belt, if sound vanishes check turntable assembly for play.I assume the belt is nice and flexible. Are any of the motor mounts cracked or rock hard? They should be flexible...I stock those as do others. > Any advice would be appreciated. > > Thank you. > > Shankar Singh You are welcome! John :-#)# -- John's Jukes Ltd. 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757 (Pinballs, Jukes, Video Games) flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Jukebox-list mailing list -- jukebox-list(a)lists.netlojix.com To unsubscribe send an email to jukebox-list-leave(a)lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/

1 0

2024

2023

Jukebox-list July 2024