Hi folks:
Cali and I operating the VHF contact this weekend from East Camino Cielo. My vehicle is on the let and it has two, 28 element 1296 MHz yagis, one 10 element 2-meter yagi and one 10 element 440 yagi. Callie worked 220 from a hand-held and he used a 6 meter dipole for voice and FT8.
Ken Owen, N6KTH https://www.qrz.com/db/N6KTH
Nice setup Ken! How did you both do in the contest?
Dave Ai6vx
On Monday, June 16, 2025, n6kth n6kth.com via SBARC-list < sbarc-list@lists.netlojix.com> wrote:
Hi folks:
Cali and I operating the VHF contact this weekend from East Camino Cielo. My vehicle is on the let and it has two, 28 element 1296 MHz yagis, one 10 element 2-meter yagi and one 10 element 440 yagi. Callie worked 220 from a hand-held and he used a 6 meter dipole for voice and FT8.
Ken Owen, N6KTH https://www.qrz.com/db/N6KTH
Ken - I caught you on FT8 (6m). Didn't see Calli, unfortunately.
I had a QSO with Chris on San Clemente Island via 2m FM and 70cm FM (and a QSO with them on 6m FT8). They seemed clearer and louder on 70cm than on 2m. I did 2m/70cm from my home in Winchester Canyon using my Comet CX-333 vertical on roof. FT8 was via Yagi atop UCSB engineering roof.
Calli - did you work San Clemente via SSB 6m? I was hoping to but had technical problems with remoting microphone and didn't hear them SSB anyway.
How'd you guys do on 220 and 1.2? (Did you get San Clemente on both)?
Would love to see your logs.
73, the "other" Ken KA6KEN
--On Monday, June 16, 2025 12:29 PM -0400 "n6kth n6kth.com via SBARC-list" sbarc-list@lists.netlojix.com wrote:
Hi folks:
Cali and I operating the VHF contact this weekend from East Camino Cielo. My vehicle is on the let and it has two, 28 element 1296 MHz yagis, one 10 element 2-meter yagi and one 10 element 440 yagi. Callie worked 220 from a hand-held and he used a 6 meter dipole for voice and FT8. Ken Owen, N6KTH https://www.qrz.com/db/N6KTH
Hey guys.
We're weren't seriously contesting, so I don't think I'll submit my logs. Mostly I wanted to see how well my setup was doing. I did work San Clemente Island on 2, 440, and 1.2. Also worked at least one station in San Diego on 1.2. On my 1.2 setup, San Diego and San Clemente Island were just about 5 degrees difference, but it was necessary to place the beam right in order to hear either one of them! 56 elements is fun!
On 06/16/2025 12:45 PM EDT Ken Alker via SBARC-list sbarc-list@lists.netlojix.com wrote:
Ken - I caught you on FT8 (6m). Didn't see Calli, unfortunately.
I had a QSO with Chris on San Clemente Island via 2m FM and 70cm FM (and a QSO with them on 6m FT8). They seemed clearer and louder on 70cm than on 2m. I did 2m/70cm from my home in Winchester Canyon using my Comet CX-333 vertical on roof. FT8 was via Yagi atop UCSB engineering roof.
Calli - did you work San Clemente via SSB 6m? I was hoping to but had technical problems with remoting microphone and didn't hear them SSB anyway.
How'd you guys do on 220 and 1.2? (Did you get San Clemente on both)?
Would love to see your logs.
73, the "other" Ken KA6KEN
--On Monday, June 16, 2025 12:29 PM -0400 "n6kth n6kth.com via SBARC-list" sbarc-list@lists.netlojix.com wrote:
Hi folks:
Cali and I operating the VHF contact this weekend from East Camino Cielo. My vehicle is on the let and it has two, 28 element 1296 MHz yagis, one 10 element 2-meter yagi and one 10 element 440 yagi. Callie worked 220 from a hand-held and he used a 6 meter dipole for voice and FT8. Ken Owen, N6KTH https://www.qrz.com/db/N6KTH
SBARC-list mailing list -- sbarc-list@lists.netlojix.com To unsubscribe send an email to sbarc-list-leave@lists.netlojix.com
Ken Owen, N6KTH https://www.qrz.com/db/N6KTH
What radio were you using for 1.2GHz?
--On Monday, June 16, 2025 2:41 PM -0400 "n6kth n6kth.com" n6kth@n6kth.com wrote:
Hey guys.
We're weren't seriously contesting, so I don't think I'll submit my logs. Mostly I wanted to see how well my setup was doing. I did work San Clemente Island on 2, 440, and 1.2. Also worked at least one station in San Diego on 1.2. On my 1.2 setup, San Diego and San Clemente Island were just about 5 degrees difference, but it was necessary to place the beam right in order to hear either one of them! 56 elements is fun!
On 06/16/2025 12:45 PM EDT Ken Alker via SBARC-list sbarc-list@lists.netlojix.com wrote:
Ken - I caught you on FT8 (6m). Didn't see Calli, unfortunately.
I had a QSO with Chris on San Clemente Island via 2m FM and 70cm FM (and a QSO with them on 6m FT8). They seemed clearer and louder on 70cm than on 2m. I did 2m/70cm from my home in Winchester Canyon using my Comet CX-333 vertical on roof. FT8 was via Yagi atop UCSB engineering roof.
Calli - did you work San Clemente via SSB 6m? I was hoping to but had technical problems with remoting microphone and didn't hear them SSB anyway.
How'd you guys do on 220 and 1.2? (Did you get San Clemente on both)?
Would love to see your logs.
73, the "other" Ken KA6KEN
--On Monday, June 16, 2025 12:29 PM -0400 "n6kth n6kth.com via SBARC-list" sbarc-list@lists.netlojix.com wrote:
Hi folks:
Cali and I operating the VHF contact this weekend from East Camino Cielo. My vehicle is on the let and it has two, 28 element 1296 MHz yagis, one 10 element 2-meter yagi and one 10 element 440 yagi. Callie worked 220 from a hand-held and he used a 6 meter dipole for voice and FT8. Ken Owen, N6KTH https://www.qrz.com/db/N6KTH
SBARC-list mailing list -- sbarc-list@lists.netlojix.com To unsubscribe send an email to sbarc-list-leave@lists.netlojix.com
Ken Owen, N6KTH https://www.qrz.com/db/N6KTH
IC-9700
On 06/16/2025 7:35 PM EDT Ken Alker via SBARC-list sbarc-list@lists.netlojix.com wrote:
What radio were you using for 1.2GHz?
--On Monday, June 16, 2025 2:41 PM -0400 "n6kth n6kth.com" n6kth@n6kth.com wrote:
Hey guys.
We're weren't seriously contesting, so I don't think I'll submit my logs. Mostly I wanted to see how well my setup was doing. I did work San Clemente Island on 2, 440, and 1.2. Also worked at least one station in San Diego on 1.2. On my 1.2 setup, San Diego and San Clemente Island were just about 5 degrees difference, but it was necessary to place the beam right in order to hear either one of them! 56 elements is fun!
On 06/16/2025 12:45 PM EDT Ken Alker via SBARC-list sbarc-list@lists.netlojix.com wrote:
Ken - I caught you on FT8 (6m). Didn't see Calli, unfortunately.
I had a QSO with Chris on San Clemente Island via 2m FM and 70cm FM (and a QSO with them on 6m FT8). They seemed clearer and louder on 70cm than on 2m. I did 2m/70cm from my home in Winchester Canyon using my Comet CX-333 vertical on roof. FT8 was via Yagi atop UCSB engineering roof.
Calli - did you work San Clemente via SSB 6m? I was hoping to but had technical problems with remoting microphone and didn't hear them SSB anyway.
How'd you guys do on 220 and 1.2? (Did you get San Clemente on both)?
Would love to see your logs.
73, the "other" Ken KA6KEN
--On Monday, June 16, 2025 12:29 PM -0400 "n6kth n6kth.com via SBARC-list" sbarc-list@lists.netlojix.com wrote:
Hi folks:
Cali and I operating the VHF contact this weekend from East Camino Cielo. My vehicle is on the let and it has two, 28 element 1296 MHz yagis, one 10 element 2-meter yagi and one 10 element 440 yagi. Callie worked 220 from a hand-held and he used a 6 meter dipole for voice and FT8. Ken Owen, N6KTH https://www.qrz.com/db/N6KTH
SBARC-list mailing list -- sbarc-list@lists.netlojix.com To unsubscribe send an email to sbarc-list-leave@lists.netlojix.com
Ken Owen, N6KTH https://www.qrz.com/db/N6KTH
SBARC-list mailing list -- sbarc-list@lists.netlojix.com To unsubscribe send an email to sbarc-list-leave@lists.netlojix.com
Ken Owen, N6KTH https://www.qrz.com/db/N6KTH
Hello Friends.
You are invited to join us on the Santa Barbara Two-Meter SSB Roundtable tonight on 144.210 starting at 8:00 PM. We have regularly been having check-ins from all over Southern California, and it's a great way to test your gear and enjoy chatting with some fun folks. KD6OVS and I have been operating from the mountains above Santa Barbara, so we can hear just about everyone. Join us tonight or any Wednesday evening!
-
Dave Schmidt -
Ken Alker -
n6kth n6kth.com