Thanks, Al! All good suggestions and I'm going to note them for the future. I ended up temporarily just putting the mast INSIDE the 3.5" OD pipe (it is 3" ID and the OD of my mast is 2.25") and it is working fine for now, but it spins in the wind (not good :-), and is a little crooked.
I ended up finding the perfect clamp at Talley which Andrew (KG6END) at Santa Barbara Electronics Supply can order for me at 1/2 the cost that I'd have to pay direct to Talley. That said, I haven't ordered it yet, so if anyone has one they want to sell, I'm still looking.
Ken
--On Wednesday, August 22, 2018 8:16 PM -0400 Alan Soenke via SBARC-list sbarc-list@lists.netlojix.com wrote:
You can try back to back 'U' bolt clamps in a pinch. It'll take 4 if one of the mast is free to prevent it from tipping to one side. Fence company's have more appropriate clamps for$$. Might try Home Depot or OSH. When all else fails use some good baling wire and a large nail to form a figure 8. Do it 2 places., one shoulder high and one ankle high. For temporary nylon rope will work.
Al
Sent from AOL Mobile Mail
On Tuesday, August 21, 2018, Ken Alker - KA6KEN via SBARC-list sbarc-list@lists.netlojix.com wrote:
I am trying to attach a 2-1/4" O.D. push-up mast to a 3-1/2" O.D. pipe that I have cemented into the ground (my old 9-foot "big ugly dish" mounting pole). Does anyone have anything they want to get rid of or sell that might accomplish this? Old, rusted, and used is fine.
Thanks! Ken KA6KEN _______________________________________________ SBARC-list mailing list SBARC-list@lists.netlojix.com http://lists.netlojix.com/mailman/listinfo/sbarc-list