Greetings guys-n-gals, I have an over-the-air television antenna question.
I have a 4-bay bow-tie UHF antenna that has a beam-width of approx.
45-degrees.
About 10-feet in front of it, is a UHF yagi.
The antennas are 100-degrees offset from each other (e.g., bow-tie faces
North-West, yagi faces East) and I was planning to use a Channel Master
Join-Tenna to join the two antennas together onto a single 75-ohm coax.
However, I get a BETTER signal level not only the far-away North-West
channel (45% vs. 23%) if I don't use the Join-Tenna, leave the yagi in
front of the bow-tie, and just connect directly into the bow-tie.
I was assuming it was the loss of the Join-Tenna, however, when I had
the yagi face NW to the far-away channel, and the bow-tie face East to
the local channels, the results were not better on ANY channel.
I'm thinking that the Yagi pointed at the strong local channels is
coupling the strong local channels in front of the bow-tie antenna, thus
giving the bow-tie a 90-degree side-lobe. This WITHOUT the loss from
the Join-Tenna is giving me the better signals.
Does the make sense ?
Comments ? Ideas ?
Thanks,
:-) neil
KE6DCJ