The manual should cover both the lift arm and clamping adjustments. Shankar Singh On Sep 20, 2026, at 14:40, Steve Wahl via Jukebox-list <jukebox-list@lists.netlojix.com> wrote: Hi, all, I have a Wurlitzer 2410S that has become slightly unreliable clamping the record. I made a small adjustment to the lift arm height that might have fixed it. But the machine is in a position where the cancel button is hard to reach, so in case it happens again, I was thinking a remote cancel button would be a good idea. I was assuming that it'd be possible to wire something like a doorbell button somewhere. I was surprised to see adding a remote cancel button wasn't covered in the manual I have, not even mention of an available remote to add to it. And from reading the schematics, it looks like it might take a 3-wire, SPDT switch, not just a normally open "doorbell" switch to make this happen. Is that right? Was there an offical remote switch that could be added? How did it connect? Thanks, --> Steve -- Steve Wahl steve@5wahls.com _______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/