For Sale: 2 meter mobile Rig
For Sale: 2 meter (144 MHz) Ham Radio Rig Includes Alinco 50 Watt 2-meter-band radio transceiver Samlex 10 Amp 12 volt power supply Just add an antenna... 1) The Radio -- Alinco DR-150T 2M 50W transceiver w/extended receive 108-173.995/440-449MHz Features - UNIQUE "Channel Scope" shows activity on adjacent freq's or channels +/- 20kHz - 60kHz OR +/- 3 memory channels (each side of center freq) - Transmit range: 144.0 MHz - 147.995 MHz - Power Output: 10w, 25w, 50w - Receive range: 108.0 MHz - 173.995 MHz, 440.0 MHz - 449.995 MHz - AM receive/aircraft - Memory channels: 100, includes 1 call channel - Memory contents: receive freq, TX offset, tone setting, tone encoder frequency, tone decoder frequency, DSQ squelch - Dual VFO's A + B - Standard +/- 600kHz and custom splits - Programmable upper/lower scan limits, memory lock-outs - Programmable DTMF "speed dial" - CTCSS encode/decode - DSQ (Digital Coded Squelch), Group and private pager modes - 1200/9600 baud packet (includes dedicated 9600 baud port) - Control radio remotely using DTMF keypad - Multiple radios can be cloned over-the-air! NO WIRES NEEDED - Input Voltage: 13.8vDC nominal The Alinco DR-150TQ is loaded! Full 50 watts out on 2 Meters plus receive 440 MHz and receive aircraft band. The channel scope display functions in both VFO and memory mode. Two VFOs and 100 memories are featured. The DR-150TQ comes standard with 50 CTCSS tone encoder, 9600 bps/phone patch interface jack. The EMS-12 DTMF mic also permits direct frequency entry. The EJ-20U CTCSS Tone Squlech Decoder is standard in this "Q" version. This radio even supports air cloning and three power output levels (50/25/10 watts). This radio is 5.5 x 1.6 x 5.1 inches 1.8 lbs. Rave reviews at https://www.eham.net/reviews/view-product?id=258 The radio is super clean (see photos) and includes all accessories: mic, mounting bracket, manual... It comes pre-programmed with the standard Santa Barbara region repeaters and simplex frequencies. 2) The Power Supply — Samlex RPS1207 Regulated DC Power Supply 13.8 VDC 7-10 amp Output Input: 120VAC Output: 13.8 VDC 7-10 Amps (i.e., up to 138 Watts) Almost new For sale only because I'm moving to the hills and need to get a more powerful system with a big antenna... Contact Stephen (W6STP) @ T: (805) 895-6252 -- Stephen Travis Pope Ojai, California, USA http://HeavenEverywhere.com <http://heaveneverywhere.com/> http://FASTLabInc.com <http://fastlabinc.com/> https://vimeo.com/user19434036/videos <https://vimeo.com/user19434036/videos> http://heaveneverywhere.com/Reflections --
participants (1)
-
stephen@heaveneverywhere.com